on my 86 200x the axle and hub is stripped and i was wondering where i could get a cheap axle or what other kinds of trike or quad axles i chould use on it. I dont have alot of money to fix it or would just buy it band new
At The Back Of The Pack
Arm chair racerFirst time rider
200x axle
on my 86 200x the axle and hub is stripped and i was wondering where i could get a cheap axle or what other kinds of trike or quad axles i chould use on it. I dont have alot of money to fix it or would just buy it band new
At The Back Of The Pack
Arm chair racerFirst time rider
would a 84 200x axle work and 250r hub
Power User
Roostin Away
I am pretty sure that the axle off the 83-85 200x will not work.
84 Honda Big Red w/plow
85 Honda 200X
88 Honda CR 125
86 350x(in process of building)
:trikesown :Beerchug :trikesown
At The Back Of The Pack
Arm chair racerFirst time rider
well is there anything that will work besides a 86 200x
Power User
Roostin Away
possibly an axle of the 200sx?
84 Honda Big Red w/plow
85 Honda 200X
88 Honda CR 125
86 350x(in process of building)
:trikesown :Beerchug :trikesown
Power User
Teaching quads a lesson
I explored the same thing, mine is slightly bent, the onlything that will work is a 200x axle 86 or 87 and they are discontinued and durablue doesn't make one now. I was lucky enough to get a new durablue, that I didn't install yet.
Clean enough to eat a potpie off of
Teaching quads a lesson
You could use the 350X rear set up. Rear shock,swinger,and axle. Would be a nice upgrade.
R.I.P Raven
2006 Yamaha Banshee Special Edition
1996 Honda CBR 600 F3
At The Back Of The Pack
Arm chair racerFirst time rider
350x idea is good but like i said i dont have money
Just Too Addicted
Arm chair racerJust too addicted
Call an atv salvage yard and ask them if they have one or lookin a junk yards for one.
At The Back Of The Pack
Arm chair racerFirst time rider
Thats what ive tried but havent found one yet
Clean enough to eat a potpie off of
Teaching quads a lesson
Best thing to do is save some cash,then do the upgrade,untill then look for another axle.
R.I.P Raven
2006 Yamaha Banshee Special Edition
1996 Honda CBR 600 F3
Roostin' Away
Arm chair racerRoostin Away
sorry to steal your thread but ... does this upgrade work on the 83-85 200x?Originally Posted by 84250r
also are there any axles that interchange with the 200x one?
'04 450r, hr +3 stroker, s2 hotcam
'84 Honda 200x
slow restro
Previous rides 82 Yamaha yt175, 85 Yamaha 225DR, 84 Honda 200M, Ski-doo Olympic 340
Power User
Roostin Away
are you talking about just the shock or the whole rear end?sorry to steal your thread but ... does this upgrade work on the 83-85 200x?
84 Honda Big Red w/plow
85 Honda 200X
88 Honda CR 125
86 350x(in process of building)
:trikesown :Beerchug :trikesown
Dirty Main jets are my bane.
4 Wheels? Huh?
i have a 86 200X rear end swinger axel cariier all together it needs new bearings BUT i cant get it apart! also cant get a hub to slide of etheir!! you're thing this bike has seen lots ok water but guess what the swinger bolt slide right out
i know go figure
Reply With Quote