New to the board
Arm chair racerNew to the board
Hey, I was out for a ride today and noticed the bike running a little strange and puttering a little bit. I checked the carb and the air adjustment screw fell out and I couldn't find it. Does anybody know if there is a normal screw that I can pick up at canadian tire and if so what size? Or would I have to order in the original because nothing else would work? thanks Rob
Power User
Got the holeshot
carbparts.com $11 for a kit, you lost the spring,screw,rubber o-ring and washer,and yes that is all in that little hole!!
1985 With "86" Plastic's,Custom 12" Alluminum Extended Swing Arm,39MM PWK,"TRX" Filter,9 Paddle TALLER HALLER'S on 11" Wide Rim's,LOT'S of Stainless,LOT'S of Alluminum,LOT'S of PowderCoating,NOTHING Stock..
FASTEST Tri-Z on The Planet...MAKE A NOTE !! and the SECOND FASTEST, WRITE IT DOWN AGAIN!!!
Power User
Got the holeshot
oh yeah ,anymore than 2 1/2 turns out and the spring wont have enough tension to hold it in and you will lose it again!
FASTEST Tri-Z on The Planet...MAKE A NOTE !! and the SECOND FASTEST, WRITE IT DOWN AGAIN!!!
New to the board
Arm chair racerNew to the board
Hey thanks for the replies. I do have the other parts, for some reason they didn't fall out with the screw. The screw is the only part i'm missing.
Reply With Quote