my oil injector is realy messed up and i am always folling plugesit is pising me off can i just drain my oil and pre mix it at 32:1
First Time Rider
Arm chair racerNew to the board
my oil injector is realy messed up and i am always folling plugesit is pising me off can i just drain my oil and pre mix it at 32:1
three wheeling for life
rides:
83 honda atc 200 Sold for $400
saving up for tecate 250R tri Z ao 350X
Formerly hond_atc
Arm chair racerJust too addicted
what bikes is this for
First Time Rider
Arm chair racerNew to the board
a kd 80 i wana get it runing and sell it for some more money to get a trike
three wheeling for life
rides:
83 honda atc 200 Sold for $400
saving up for tecate 250R tri Z ao 350X
Formerly hond_atc
Arm chair racerJust too addicted
if its a two stroke with oil injection you can probaly get a kit to block it up...or make somthing your self. if its a 4 stroke you cant pre mix
First Time Rider
Arm chair racerNew to the board
all right thanks and it is a 2 stroke i know you are not to mix with a 4 stroke
three wheeling for life
rides:
83 honda atc 200 Sold for $400
saving up for tecate 250R tri Z ao 350X
Banned
The day begins with 3WW
Just disconnect the oil line going into the top end, some go into the carb, (some go into the cylinder), and plug the hole. Most Oil pumps are not pumps at all, and oil is just vacuum fed, and metered with the throttle cable.
Just Too Addicted
Arm chair racerJust too addicted
mine seems to go into the lower end case. is it still ok to disconnect and premix 32:1
Reply With Quote