Results 1 to 3 of 3

Thread: POWERVALVED TRI-Z engine is in!!!pics!!!!!

  1. #1
    Join Date
    Nov 2003
    Location
    Front royal, va
    --
    2,186

    POWERVALVED TRI-Z engine is in!!!pics!!!!!

    here ya go, all you tri-z fans will nut!!95% finished,need to get two small gaskets,and the aircleaner cleared the tank!!!!!,but since the clylinder is larger in diameter, the pipe springs are now too short,thats the only problem with the whole install!!!!!no more need for the boost bottle, still need the jemco drag pipe ,and fill the fluids and im off!!
    Attached Thumbnails Attached Thumbnails motor in bike.jpg   motor is in.jpg   left motor in.jpg   motor is in z.jpg  
    1985 With "86" Plastic's,Custom 12" Alluminum Extended Swing Arm,39MM PWK,"TRX" Filter,9 Paddle TALLER HALLER'S on 11" Wide Rim's,LOT'S of Stainless,LOT'S of Alluminum,LOT'S of PowderCoating,NOTHING Stock..

    FASTEST Tri-Z on The Planet...MAKE A NOTE !! and the SECOND FASTEST, WRITE IT DOWN AGAIN!!!

  2. #2
    Join Date
    Jun 2004
    Location
    geraldton, west australia
    --
    1,068
    are you gunna put a seat belt on that thing!!!!! LMAO
    what are boost bottles an what do they do.

  3. #3
    Join Date
    Nov 2003
    Location
    Front royal, va
    --
    2,186
    a boost bottle is a small canister that attaches between the intake and cylinder and provides an extra air charge under hard throttle pulls,blasters dont have them,but the banshee does, you can even buy bigger ones for the shee,which do not a thing for the bike but look better!
    1985 With "86" Plastic's,Custom 12" Alluminum Extended Swing Arm,39MM PWK,"TRX" Filter,9 Paddle TALLER HALLER'S on 11" Wide Rim's,LOT'S of Stainless,LOT'S of Alluminum,LOT'S of PowderCoating,NOTHING Stock..

    FASTEST Tri-Z on The Planet...MAKE A NOTE !! and the SECOND FASTEST, WRITE IT DOWN AGAIN!!!

//ArrowChat Integreation Code //