Results 1 to 6 of 6

Thread: 200x project update

  1. #1
    brandosfiero's Avatar
    brandosfiero is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Jan 2004
    Location
    west unity ohio
    --
    199

    200x project update

    well this is after a week i guees i cant get it done buy this weekend the dealer said my parts wont be here for 5 days because they had to get them from honda.istill need rear fender if anyone has any used ones that want to sell let me know.tell what you think so far
    Attached Thumbnails Attached Thumbnails nwer2.jpg   new5.jpg  

  2. #2
    Join Date
    Nov 2003
    Location
    Oswego, IL
    --
    1,858
    i like how u painted the fender. well it looks like it was photo shoped. looking great man. i like what i see. u goign to go with white fenders?
    1974 atc 90 project underway cuzzztom

    1985 atc 110 for sale

    84 200s all original got off the first and only owner
    new carb
    maybe putting my 200x cam in it but not sure

    old trike
    1985 200x
    12.1 piston
    oil cooler kit
    white bors cam
    super trapp exhaust
    uni clamp on air filter
    350x front end

  3. #3
    brandosfiero's Avatar
    brandosfiero is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Jan 2004
    Location
    west unity ohio
    --
    199
    its my camera it dosent work very good with white it makes it look wierd. ill take another picture during the day because these were both at night

  4. #4
    looks good!keep us updated.
    84 Honda Big Red w/plow
    85 Honda 200X
    88 Honda CR 125
    86 350x(in process of building)
    :trikesown :Beerchug :trikesown

  5. #5
    brandosfiero's Avatar
    brandosfiero is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Jan 2004
    Location
    west unity ohio
    --
    199
    ok first when i got it it would use a quart of oil in 2 days.and i know its not the rings they are new.one rocker arm was worn and the timing chain cuide was broken is their anything that will use that much oil.it ran perfect just used a ton of oil

  6. #6
    Join Date
    Feb 2004
    Location
    Us
    --
    727
    the rings migt not have seated right when it was broke in. i you did a compresion or leakdown test you probably could have found it out when it was still together. it also could hae been valve seals, but usually when your valve seals are shot, it only smokes when you first start it. i would suspect the rings to be the culprit though. you might be able to finish hone it and try it again, but im not sure if you can do that with used rings. you'll have to wait for a response from a more seasoned veteren. good luck!

//ArrowChat Integreation Code //