Power User
The day begins with 3WW
need a carb rebuild kit for my 82' atc 200...
well i finelly figurd i need a few seals and what not for my carb on the 200 i just got..and the jets and stuff are a little old and stuff so i figured ill get a whole kit and fix it all up...i just need to know where to get one of the net erm anyware lil help plese? i really wana ride this thing
1985 Tri-Z-
Originally Posted by mywifeknowseverything
New to the board
Arm chair racerNew to the board
i would try your honda dealer or dennis kirk.
1986 200x- Not running as of now
New to the board
Arm chair racerNew to the board
1985 Kawasaki Klt 160 (SOLD)
1983 Honda 185s (SOLD)
2001 Kawasaki Lakota Sport 300
1993 Kawasaki Bayou 220
2005 SUNL SLA-150KL Quad (SOLD)
Power User
The day begins with 3WW
yea thanks guys..its just every kit i see..the theres a big ass O-ring in it and i assume its for the bowl and the carb but mine was like a molded o-ring type a seal..and its wrecked and what not..it just donstl look to me like the big oring would fit in there with out bein a trailprotrailprotrailprotrailprotrailpro lol
1985 Tri-Z-
Power User
Roostin Away
yea try denniskirk or www.hyperparts.com ...its usually the cheapest
trikes owned:
85' 200m - sold
84' 200x - sold
83' 185s - sold
82' 185s - sold
85' 350x !!! - selling
At The Back Of The Pack
Arm chair racerFirst time rider
http://www.mfgsupply.com/m/c/process.html
this has one for 12.95
85 ATC350X- weisco 10.25:1, uni, +3 swingarm, 3in. wheelspacers, RAD carrier, 450r muffler
85 Big Red
83 KLT200
82 ATC200
If it aint broke fix it anyway because it soon will be
Power User
The day begins with 3WW
came up as not there
EDIT: found it...iv heard that moose kits where crap and didnt work./.just what i head im prolly wrong
Last edited by MTS; 09-26-2004 at 11:12 PM. Reason: Found it
1985 Tri-Z-
Power User
Lord of the trike
Well, yes that big o-ring is a pain to get in the grove for the bowl but that is what it is there for. If that gasket doesn't leak the don't try to replace it.
1984 Yamaha YT 60 Tri Zinger(current project)
1983 Yamaha YTM 200 (rear suspension kit)..... long term project
2004 BMW R1150R
1972 Honda CT 70
2007 Lifan 110
Power User
The day begins with 3WW
ahh but it dose leak unfounatly its all cracked i had to take it out to clean the carb cuze the bike sat for prolly 10+ years with gas in the tank and carb..like the gas was freakin yellow when i dumped it out lol
1985 Tri-Z-
New to the board
Arm chair racerNew to the board
HYPERPARTS IS AMAZING you gotta love it, almost everything OEM, and cheap too
At The Back Of The Pack
Arm chair racerAt the back of the pack
Use a small dab of super glue around the grove, and work the new o-ring in slowly. As far a gasket kit vesrah works fine.
'02 ranxher 4x4 '83 big red '84 110, '86trx70 project, '85 bigred project
Power User
Lord of the trike
I have used the super glue trick too which is the only way I have been able to keep that darn o-ring in there. Only use a very little bit, if too much glue gets on the o-ring it makes it harden and i wouldn't imagine super glue in the fuel system to be very good either.
1984 Yamaha YT 60 Tri Zinger(current project)
1983 Yamaha YTM 200 (rear suspension kit)..... long term project
2004 BMW R1150R
1972 Honda CT 70
2007 Lifan 110
Reply With Quote