BTW, Im in still in need of a GOOD 125 engine.
Anyway pics on the way, stay tuned.
BTW, Im in still in need of a GOOD 125 engine.
Anyway pics on the way, stay tuned.
Last edited by jmsmilin; 10-26-2004 at 08:53 PM.
RIDES:
Current OG rides:
~1993 300EX 1 owner (just sold)
~1993 TRX90 matches the 300
~1996 Z50R the FIDDY
~1992 YSR50 (sold)
~ATC 70 (w/suspension), ATC 185S (w/susp), 250SX, 350X, etc, etc, ALL SOLD!
WTB: small machines - ATC70s w/ suspension, TRX90, z50, CRF/XR70/110, CT70, CT90, SL70 etc.
Favorite riding spots:
1. Twin Buttes, San Angelo TX
2. Turkey Bay, LBL KY & Linton Beach in Bumpus Mills
3. Sunnyside ATV, Wrens GA
not even helicoil crap would fix it, and I set out for a good restore on this bike, not some rigged junker with bad exhaust seal. The whole exhaust area is broke BTW, and as you can see it fits, I have the pull start off to figure out why its locked up.
RIDES:
Current OG rides:
~1993 300EX 1 owner (just sold)
~1993 TRX90 matches the 300
~1996 Z50R the FIDDY
~1992 YSR50 (sold)
~ATC 70 (w/suspension), ATC 185S (w/susp), 250SX, 350X, etc, etc, ALL SOLD!
WTB: small machines - ATC70s w/ suspension, TRX90, z50, CRF/XR70/110, CT70, CT90, SL70 etc.
Favorite riding spots:
1. Twin Buttes, San Angelo TX
2. Turkey Bay, LBL KY & Linton Beach in Bumpus Mills
3. Sunnyside ATV, Wrens GA
RIDES:
Current OG rides:
~1993 300EX 1 owner (just sold)
~1993 TRX90 matches the 300
~1996 Z50R the FIDDY
~1992 YSR50 (sold)
~ATC 70 (w/suspension), ATC 185S (w/susp), 250SX, 350X, etc, etc, ALL SOLD!
WTB: small machines - ATC70s w/ suspension, TRX90, z50, CRF/XR70/110, CT70, CT90, SL70 etc.
Favorite riding spots:
1. Twin Buttes, San Angelo TX
2. Turkey Bay, LBL KY & Linton Beach in Bumpus Mills
3. Sunnyside ATV, Wrens GA
i still have the 86 125 motor for sale
1985 With "86" Plastic's,Custom 12" Alluminum Extended Swing Arm,39MM PWK,"TRX" Filter,9 Paddle TALLER HALLER'S on 11" Wide Rim's,LOT'S of Stainless,LOT'S of Alluminum,LOT'S of PowderCoating,NOTHING Stock..
FASTEST Tri-Z on The Planet...MAKE A NOTE !! and the SECOND FASTEST, WRITE IT DOWN AGAIN!!!
Ok. look. About the drilling. THis was apparently drilled before we got it. The exaust was not drilled by us, because 1 we woudln't hide that from you if we knew it, and 2, the exaust was barely on, that was the first to come off and was effortless.
The carb. I mentioned in an email to you, one of the 3 or 4 i sent, to send me the address where you want the good carb sent. HOWEVER, that i got kinda screwed on that deal because in order to get you your stuff by Oct 6 like you wanted, I had to send everything with the bad carb. So i payedthe guy for the good carb, and it got to my house after i had sent everything else.
Then I saw you online and you signed off immediatly. I didn't want to post on the boards, but it was the only way i knew. I put it off and put it off for that reason. Then once you shunned me away on the messenger, and didn't asnwer my emails, that was all i felt i could do!
SEND IT BACK TO ME and I will refund your money if you are truely that unsatisfied with it. Though it shifted fine for us in and out of gears, and pullled/turned over just fine. Call me crazy but I don't lie.
Last edited by azhondagrl; 10-26-2004 at 11:47 PM.
HMMMMM. I see an easy solution to this,,,, if its that bad,, maybe you didn't ask enough questions or get enough pictures ,,, or maybe the person selling didn't really know what to look for??? but a deal is a deal,,, if your going to keep it finish the deal ,,, otherwise maybe cut your losses and ship it back for a refund???? they say it shifted you say it won't they say it turned over you say it DON'T ,,, so based on your post about still needing a GOOD ONE ,,, I SAY EASY WAY TO END THIS THREAD IS TO SHIP IT BACK,,,,![]()
I agree. Send it back and start over.![]()
Clay Whitman
Newnan, GA
AMSOIL DEALER
My Toys
2008 Yamaha Rhino 700 SE
1999 Larson 226 SEI 5.0L EFIVolvo I/O LOVE IT
I think its big of her to say she will refund your loses. that also shows she has trust in this product.
adam
86 ATC 500R the duner..
85 ATC 500R...the not quite finished faster duner
1985 ATC 250R Bone stock!!
1985 ATC250R mx/duner
1986 TRX370R MX/Duner
94 Banshee 400PV Cheetah 105RWHP
Good ideas yes. But heres the deal, if I send it back, now Im out $80 shipping. She got it for $20, sold it to me for $140 and claims to have shipped it for $80, so shes still up $40 plus still has the entire rest of the bike. Now she will be out $80 in her shipping only if I get my $140 back-but have to trust I will get it now and can still sell it as parts and get back some $ and probably not lose at all, mean while my $80 is gone.
I think the best deal would be if you reduced the price due to the fact that I have to purchase a complete new head, and unseize it just to get it going. But whatever I dont care anymore.
RIDES:
Current OG rides:
~1993 300EX 1 owner (just sold)
~1993 TRX90 matches the 300
~1996 Z50R the FIDDY
~1992 YSR50 (sold)
~ATC 70 (w/suspension), ATC 185S (w/susp), 250SX, 350X, etc, etc, ALL SOLD!
WTB: small machines - ATC70s w/ suspension, TRX90, z50, CRF/XR70/110, CT70, CT90, SL70 etc.
Favorite riding spots:
1. Twin Buttes, San Angelo TX
2. Turkey Bay, LBL KY & Linton Beach in Bumpus Mills
3. Sunnyside ATV, Wrens GA
WHAT??? do you hear yourself?
you agreed to pay $140 plus shipping ,,, which was $80 now you say it is junk ,, so send it back,,, so now you have not paid shipping so they got $60 for the whole thing,,,, i say who is ripping who off????? pull starters alone bring more than $60 on ebay ,,, plus all the other parts,,,, WFT,, if she got it for FREE what difference does that make you made a deal and now YOU ARE BACKING OUT!!!!!
LIke Kasey said, even if I got it for free, does that mean i have to give it to you for free? and the rest of the bike? that would include....the 6 pack rack, and uhhh,, the frame and the wheels and tires that were no good, and the headlight. You got the majority of the bike. the footpegs, the dash, the carb, the engine, the pull start, the wiring harness.
I am not "claiming" it was 80 dollars.Thats what it cost!! The package was 71 to ship,(weighed 90 lbs) had to buy the big thing to put it in which was another 9, PLUS i drove it to the airport for you. THats not right next door to me, but it cut a day or so off the time to ship it to you. Guess this is what i get for bending over backwards, AND OFFERING TO TAKE IT BACK. So if you're not sending it back, why don't you live up to your end of the deal like any other civilized person would do.
Hmmm sounds like some one wanted to pull a quick one over us, but now that we are catchin on he is going to make it sound like he will lose more money. something smells like fish sticks
adam
86 ATC 500R the duner..
85 ATC 500R...the not quite finished faster duner
1985 ATC 250R Bone stock!!
1985 ATC250R mx/duner
1986 TRX370R MX/Duner
94 Banshee 400PV Cheetah 105RWHP
this is rediculous.
sorry i was 3 dollars off . I dug this up so that everybody believes me! I don't have the receipt for the container, but that was 9 dollars. so i was 3 dollars off......guess that could be called GAS money for driving 25 miles to get it to you in the time frame you wanted it in.
I'd be pissed too if I payed that much for a hunk of junk. Sounds like the product he agreed to pay for wasn't fully disclosed to him. If I sold someone something that ended up being half of what I thought it was I would cut them a deal. It's the only decent thing to do.
'02 Honda 416ex - A seasoned blend of 11 herbs and spices
'04 Honda Recon - The yard machine and snow plow
'88 Honda CR250R - Another chapter in my torrid all terrain affair