Ok yesterday we put new piston rings in the 200s and now the timeing is off how do we correct it we didnt even think we moved the chain one of us was holding it the whole time
At The Back Of The Pack
Arm chair racerAt the back of the pack
Ok yesterday we put new piston rings in the 200s and now the timeing is off how do we correct it we didnt even think we moved the chain one of us was holding it the whole time
P3 Member ( RIP 8/15/2018 )
The day begins with 3WW
are you sure you have the pulse generator in correct and not 180 degrees off ???
john
http://houseofmotorcycles.bikebandit...t_name=ATC200S
Power User
Lord of the trike
Check your manual.
1984 Yamaha YT 60 Tri Zinger(current project)
1983 Yamaha YTM 200 (rear suspension kit)..... long term project
2004 BMW R1150R
1972 Honda CT 70
2007 Lifan 110
At The Back Of The Pack
Arm chair racerAt the back of the pack
Check your cam mark vs your timing mark on the stator
Anyone know of a new project machine for me around Wisconsin?
At The Back Of The Pack
Arm chair racerAt the back of the pack
dont have a manual lol
Check your cam mark vs your timing mark on the stator
i dont really know what you mean by that
Last edited by peeweesp; 10-30-2004 at 06:06 PM.
P3 Member ( RIP 8/15/2018 )
The day begins with 3WW
so did you get it yet peeweesp ?
i just had a go around with mine on a 200es ,,, had to adujust it after replacing the oil seal in the pulse generator base.
john
At The Back Of The Pack
Arm chair racerAt the back of the pack
no i didnt get it yet havent worked on it it gets spark and stuff it just wont start so we figure its the timing any ideas on how to fix it
P3 Member ( RIP 8/15/2018 )
The day begins with 3WW
yeah ,,, i might be able to help.
on that link in my above reply ,,, see the screws ( #15 ) that hold the pulse generator base in place ,,, loosen them and rotate that goldish coloured plate clock wise just a wee bit. try starting it and see if you get fire and all that ,, you might hafta keep adjusting it till you get it purring it like a kitten.
if you don't get it ,,, p.m. me your address + i'll run a copy of my manual pertinent to timing your trike ( monday ).
john
At The Back Of The Pack
Arm chair racerAt the back of the pack
ok thx
ill try that
P3 Member ( RIP 8/15/2018 )
The day begins with 3WW
this fella has a good deal on manuals ,,,, not to mention i like looking at his helpers .
best investment you will ever make for your trike ( a good looking helper never hurts either - lol )
john
http://cgi.ebay.com/ebaymotors/ws/eB...931487949&rd=1
Roostin' Away
Arm chair racerRoostin Away
try turning the rotor 180 degrees. last year i got a 110 for $50 and the only thing i had to do was turn it 180 degreess and it fired on the first pull for the first time in 2 years. about $800 later and month of hard work i had a nice trike.
1986 350X K&N filter, DG Krome Power exhaust
1982 110 UNI filter, Cobra megaphone exhaust
1982 honda 110 exhaust for sale, PM me.
New to the board
Arm chair racerNew to the board
timing is a bit** dont frig with it if trailprotrailpro not positive that its off
My ride:
82 big red atc 200e
At The Back Of The Pack
Arm chair racerAt the back of the pack
well first we will try what everyone else is saying then if that dosnt work we will try the timing we held the chain the whole time so if its off its probobly off by one or 2 teeth at the most maybe i dont really know
P3 Member ( RIP 8/15/2018 )
The day begins with 3WW
i ain't got no mailing address yet peeweesp ,,, get it dialed in yet ???
john
Reply With Quote