Power User
Roostin Away
ok as far as the painting i got that under control but how in the hell do i get the motor clean? because i dont need to strip it off to use high heat paint and what im talking about is the cylinder how do i get all the mud out of the little crevesis? is there anything i can get and spray it in there and it will eat all lthe mud and gunk off?
1974 atc 90 project underway cuzzztom
1985 atc 110 for sale
84 200s all original got off the first and only owner
new carb
maybe putting my 200x cam in it but not sure
old trike
1985 200x
12.1 piston
oil cooler kit
white bors cam
super trapp exhaust
uni clamp on air filter
350x front end
Power User
The day begins with 3WW
go to the car wash and use a pressure washer...
1985 Tri-Z-
Originally Posted by mywifeknowseverything
At The Back Of The Pack
Arm chair racerAt the back of the pack
simple green or other degreaser and a pressure washer
Anyone know of a new project machine for me around Wisconsin?
Power User
Got the holeshot
If you want to do a really good clean/paint prep. I suggest you get it beadblasted or sandblasted. I sandblasted my head and it got rid of all the baked on mud and grime. I think i will just leave my head/cylinder that alloy bare metal colour. I'll just try and keep it very very clean so it doesnt look old and chatty.
Matt
1980 ATC 70 Needs Restoration
1985 ATC 250es Fully Refurbed
1986 ATC 350x Mint Original
Roostin' Away
Arm chair racerRoostin Away
pressure wash it then bead blast it and it will be like new
1986 350X K&N filter, DG Krome Power exhaust
1982 110 UNI filter, Cobra megaphone exhaust
1982 honda 110 exhaust for sale, PM me.
Power User
Roostin Away
thanks guys the car wash didnt do nething for that baked on gunk so i just took some good ol' gasket remover and sprayed it all down and it took most of it off. now if i get some paint on the outside of the cylinder can i sand it off or use some paint stripper to get it off?
1974 atc 90 project underway cuzzztom
1985 atc 110 for sale
84 200s all original got off the first and only owner
new carb
maybe putting my 200x cam in it but not sure
old trike
1985 200x
12.1 piston
oil cooler kit
white bors cam
super trapp exhaust
uni clamp on air filter
350x front end
At The Back Of The Pack
Arm chair racerFirst time rider
On unusual surfaces like a gast tank and a cylinder. I use bumper stripper. Its a spray on paint stripper but it acts as a foam and it fills in the nooks and crannies and it sticks to all the dips and such, got my gas tank very clean now time to clean the inside :evil:
Rides
200es Big Red "Ol Bessy"- Hondaline front rack
2005 Honda 650 Rincon 27 inch ITP Muds with 14 inch C Series Wheel, one inch Bigfoot lift kit, 2500 Warn Winch, 60 Inch Moose Plow, Hondaline Front and Rear Camo Utility Bags, K and N Filter
1999 Chevy silverado V8, K and N, fiberglass bed cap, mossy oak accents, hypertech computer tuner.
Reply With Quote
