At The Back Of The Pack
Arm chair racerAt the back of the pack
uh-oh
went bring the kids ride today, everything was working fine on my 185s. I was making a sharp curve in a trail, downshifted from 2nd to 1st, everything still good. When I tried to shift back to second, nothing...shifter wouldnt go down. I shifted into neutral from first and it shifted fine...back to 1st and it wouldnt go..its stuck in neutral....I think I even bent the shifter a lil trying...What gives? or should I say, what isnt giving?
Registered User
Arm chair racerAt the back of the pack
is the shifter kinda loose? does it flop back and forth?
At The Back Of The Pack
Arm chair racerAt the back of the pack
My have broke shifting fork. Broken piece jamming you up .
At The Back Of The Pack
Arm chair racerAt the back of the pack
no no slack at all...feels like its jammed..it will only move up maybe 1/4 to 1/2 inch
At The Back Of The Pack
Arm chair racerAt the back of the pack
That happened on my DT 400 took off side cover removed a piece of metal from fork and it worked just sloppy for 3 more years. Just lucky .
[
At The Back Of The Pack
Arm chair racerFirst time rider
I would agree and say shift fork. I had one go bad on my 83 R. It would not go into 3rd. all the other gears were there just not third. You gotta split the cases to get to it.
1985 ATC350X
"El Duderino if your not into the whole brevity thing"
Putting Priorities in Order, Busier than ever.
Catch me if you can
Could just be the shifting shaft end broke (gear shift plate). I have seen them break before.
Howdy
Reply With Quote
