New to the board
Arm chair racerNew to the board
I put a 83-85 200x front on my 81 250r. I had to buy an aftermarket fender because i didn't have one. I'm wondering why the bolt holes are so big. Are there special bolts that you use to attach the fender to the triple tree? Please help need to get riding again. Thank You
Just Too Addicted
Arm chair racerJust too addicted
There are grommets that fit the holes then there are metal inserts that go inside the grommets. Thats why the holes look big.
New to the board
Arm chair racerNew to the board
Where can you get these grommets?Originally Posted by mad_max
Just Too Addicted
Arm chair racerJust too addicted
I got a new fender like that and i couldnt figuare out how to take the gromets out of the old fender and put them in the new fender. How do you do it????
Just Too Addicted
Arm chair racerJust too addicted
I dont know where to get them other than a Honda dealer if you want them to fit right. I used a small flat blade screwdriver to install and remove them. Its not easy. Take your time and dont jab your fingers.
At The Back Of The Pack
Arm chair racerAt the back of the pack
Try pushing the metal insert out of the gromet, then put the gromet in the fender hole, then put the metal insert back in the gromet. To take gromet out of fender just reverse these step's.
1985 Honda ATC 250 Big Red
"Ugly Betty" from the handlebars back it's a
1982 Honda ATC200es, from the handlebars
forward it's a 1988 Honda TRX 300 Fourtrax.
"If you wanna play, you gotta pay..."
HELLO, my name is stickers!
Catch me if you can
Try BikeBandit.com for all your OEM Honda parts
Reply With Quote