Removing 200sx rear axle

[busy44]

How do u remove the rear axle from the frame , The pivot tube in perticular
thats located on the right side of the bike it has a crome cap over it, has a slotted nut on the outside and big allen head on the inside
This big nut and bolt holds the entire rear it works in conjunction with the shock to move up and down

[Blown 331]

You mean a 200SX 4-wheeler or what?

[smokinp]

yea..what model are you talking about?

[Howdy]

The 200sx ( 4 wheeler ) uses a bolt that goes through the swing arm and frame. Knowing this I will assume you mistyped and meant a 250sx 3 wheeler.

To remove the swing arm you need to loosen up the lock nut ( slotted nut ) a little. Then use a big allen wrench and lossen up / remove the bolt / pin.

Howdy

[busy44]

Yea my mistake 250sx Im working on 2 bikes at same time by the way got the 200s running. And thanks for the help thats what I wanted to know Undoo slotted locknut and back it out

[Pistonhead]

The 200sx ( 4 wheeler ) uses a bolt that goes through the swing arm and frame. Knowing this I will assume you mistyped and meant a 250sx 3 wheeler.

To remove the swing arm you need to loosen up the lock nut ( slotted nut ) a little. Then use a big allen wrench and lossen up / remove the bolt / pin.

Howdy

Its awesome that we have guys that know how to do any of these machines that are willing to help out. Thanks.