im lookin for a good 2stroke builder to put a new top end in my 86r- i live in mn, so if any of u mn trikers know anything let me know
At The Back Of The Pack
Arm chair racerAt the back of the pack
im lookin for a good 2stroke builder to put a new top end in my 86r- i live in mn, so if any of u mn trikers know anything let me know
First Time Rider
Arm chair racerNew to the board
Do it yourself...it's easy enough. If I can do it anyone can.
Mark
Just Too Addicted
Arm chair racerJust too addicted
just your luck, im in MT.IRON MN. and have completely rubuilt a few engines, honda 185(4-stroke),honda200(4-stroke), aircooled 250r(2-stroke),44ski-doo snowmobile, anyways where are you located? and you could just do it your self it is easy.
my trikes:
1983 honda atc 200x-k&n filter
2002 yamaha raptor 660r, yoshimura slip on, prm grab bars
1978 chevy nova, 454 v8, bds blower, 150hp shot of nitrous, full roll cage, a real power house.
1991 chevy s10 4x4 350v8.
1986 250sx
YES its fast NO you cant ride it.
Got The Holeshot
Arm chair racerJust too addicted
Try any local small engine/snowmobile repair shop if you don't want to do it yourself. Call around for the best rates. Or you could just sell it to me...jk Good Luck!
-86 Polaris Scrambler 250r/es - sold
-84 200es Big Red
-92 Ski-Doo Formula Plus 583 -88 Safari 377 -68 Super Olimpique 299
-87 Jeep XJ 5" lift/many other mods-sold
-89 F-150 4" Lift/33s
-90 Acura Integra - '83 Mustang 5.0 convertible (the new project)
Ask me about custom cut decals!
Reply With Quote