Check My Feedback before dealing with me
Roostin Away
Today I looked at an '85 R that had another cylinder with what appeared to be a housing for an exhaust valve. It had "HCC" or something close to it on the side of the housing. It didn't seem to have a spacer plate installed under the jug.
Anyone have any idea what it may have come off of? My guess is a CR, but I'm not familiar with them.
'84 ATC70.....my 8-y.o. son's ride
Power User
Teaching quads a lesson
sounds like a cr power valve motor. there are a couple of companies out there that make the conversion but it is very expensive and has little gain. goto www.macdizzy.com and ask about it.
First Time Rider
Arm chair racerNew to the board
sorry if i sound stupid, but later model atc250r's and trx's don't have powervalves? hope i don't get flamed for this lol
+8 '81R, 200x, 2 atc110's, atc200, atc200e
Check My Feedback before dealing with me
Roostin Away
You're not going to get flamed by me. You're right, the 'R wasn't designed with an exhaust valve. The 'R I speak of has one though.
Re-read my post, and you'll see that the whole message is kind of a "Where did this cylinder come from/it aint supposed to be there?" question.
'84 ATC70.....my 8-y.o. son's ride
Reply With Quote