//ArrowChat Code
Page 1 of 2 1 2 LastLast
Results 1 to 15 of 18

Thread: Carb Id

  1. #1
    Join Date
    Feb 2005
    Location
    nova scotia
    --
    9

    Carb Id

    Got a Keihin carb from a friend ...he wasnt exactly sure what it was from..figures it may have been on a 200x

    Number is PD then DGA6CLA....its about 29mm...any ideas what its from? year?

    thanks, matt

  2. #2
    Join Date
    Dec 2004
    Location
    Pa.'s Highest City
    --
    8,058
    I don't think it's from a 200x cause I got one in front of me now and the #s are PD on top then 14AA0K I don't think there 29mm either.

  3. #3
    Join Date
    Aug 2004
    Location
    Newcastle NSW Australia
    --
    128
    200x should have a Keihin PD62A for 83 and PD62B after 83, these are both 24mm carbs, not sure on the later 86 on models though!!

  4. #4
    Join Date
    Dec 2004
    Location
    Pa.'s Highest City
    --
    8,058
    Hmmm? After looking through my boxes of parts I also found a carb that has PD62 an A with a box around it then VF7. Now I'm confused? but still I know it's not 29 mm. Maybe whoever I bought the parts off of lied.

  5. #5
    Join Date
    Feb 2005
    Location
    nova scotia
    --
    9
    the second part of the number has no boxed [ ] letters

  6. #6
    Join Date
    Dec 2004
    Location
    Pa.'s Highest City
    --
    8,058
    Ya I'm tellin ya right in the middle of the bottom #'s there is an A with a box around it.
    thats on both the carbs I have and the carb that is in 400 peices on my workbench. I don't know now I'm just as confused as you are? All of them are KEIHIN though.

  7. #7
    Join Date
    Dec 2002
    Location
    deer park, texas
    --
    2,336
    it is definatly not a 200x carb. actually it was not a stock carb for any three wheeler. it comes off a dirt bike. if you really want to know what it came stock on i will research that for you.

  8. #8
    Join Date
    Dec 2002
    Location
    deer park, texas
    --
    2,336
    well the first thing i ran into. 1989 sp/ dr 250.

  9. #9
    Join Date
    Dec 2004
    Location
    Pa.'s Highest City
    --
    8,058
    Who are you talkin bout me or Mattfrox? if your searchin the net give us the link cause this has me stumped.

  10. #10
    Join Date
    Dec 2002
    Location
    deer park, texas
    --
    2,336
    well i am not talking about anyone just trying to help. i have several bits of info lying around ( well now being married it just takes up one room) the sp/dr book was one of the first ones i picked up. i started thinking more and that is wierd because to me the numbers reflect an older carb. but i could be wrong. if you want i will go through and figure what the carb fit and fax it to you or email you the models. the number you'r giving is a part number. it will not be model specific. there really could be a whole bunch of bikes this went on.

  11. #11
    Join Date
    Dec 2004
    Location
    Pa.'s Highest City
    --
    8,058
    I'm very intrested. I have a fax but never used it. I would like to know if it works though. My email is chrisreinmiller@msn.com or pm me for the fax # IT's the same as my regular phone # ? I'm almost sure.
    PD63AVF7
    PD14AA0k
    Last one PB??????? I cannot find the bottom half at the moment.
    Last edited by chris200x; 02-18-2005 at 11:20 PM.

  12. #12
    Join Date
    Feb 2005
    Location
    nova scotia
    --
    9
    barry_mann thanks for trying to help...if you find anything more please email me at: x99eqy@stfx.ca

    The number again is PDDGA6CLA...29mm

    thanks, matt

  13. #13
    Join Date
    Jun 2004
    Location
    potsdam ny
    --
    1,227
    well, they could be off old streetbikes or xr's....thats the bottom line....
    1985 Honda ATC250R drag trike with s/t kit and full drag CR hybrid motor and drag chassis...
    1986 Honda ATC250R daily rider fully modded engine, +4 swinger,etc...
    1997 Polaris Storm 800 triple, boyesen reeds, dg individual silencers, 240 studs, 123mph on radar...

  14. #14
    Join Date
    Dec 2002
    Location
    deer park, texas
    --
    2,336
    i dont think so unless your talking about old school enduros. i will try tomorrow to hunt out some stuff. but you are talking about alot of work. are you looking for a 200x carb if so i will give you one just not to dig through my pile of about 2000 toys. i have a question. where are the old guys that were on here. i do not have a problem with newbies but on these subjects they usaully have a good comment.by the way dont let my post count fool you. i kept changing names. i have beeen here since the begining. i am not here to make money i am just here to keep these trikes i love alive.

  15. #15
    Join Date
    Jun 2004
    Location
    Brazil, Indiana
    --
    1,389
    i think it may be form an xr200?? sounds about right
    trikes owned:
    85' 200m - sold
    84' 200x - sold
    83' 185s - sold
    82' 185s - sold
    85' 350x !!! - selling

//ArrowChat Integreation Code //