Results 1 to 6 of 6

Thread: Help....Flywheel Puller

  1. 03-11-2005, 06:16 PM #1
    almac16
    almac16 is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Jan 2004
    Location
    Halifax, Nova Scotia, Canada
    --
    226

    Help....Flywheel Puller

    Hi

    Is there a honda part number to get the right flywheel puller for an 85 Big Red??

    I just got one from the dealer and it is the wrong one. I thought I might be able to figure out the part number before I go back since they don't seem to know what they are doing.

    Thanks,
    Reply With Quote Reply With Quote
  2. 03-11-2005, 06:21 PM #2
    Lots_Of_Nothing's Avatar
    Lots_Of_Nothing
    Lots_Of_Nothing is offline So bombed at TF I needed both hands to hold my beer Teaching quads a lesson
    Join Date
    Oct 2002
    Location
    Upstate NY
    --
    2,665
    Are you sure its the wrong one? What is wrong about it? I have seen some people get pissed and think its the wrong one because they are trying to thread it in the usual way. The threads inthe flywheel are reverse. Meaning you turn the puller counter-clockwise to thread it into the flywheel. then you turn the bolt in the center of the puller clockwise to push against the crank.

    Just thought you better make sure that its the wrong one first.
    Give me no lip and I tell you no lie.

    -TF 05' , And cant wait till 06!

    Reply With Quote Reply With Quote
  3. 03-11-2005, 06:21 PM #3
    almac16
    almac16 is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Jan 2004
    Location
    Halifax, Nova Scotia, Canada
    --
    226
    Thanks but I got it now.

    I just checked the manual and it was in there.

    Honda Part #07733-0020000 (can't find on service honda)
    Honda Part #07933-3950000 (is on service honda)

    K&N Part #82-0120

    Now off to the dealer, again!
    Reply With Quote Reply With Quote
  4. 03-11-2005, 06:23 PM #4
    almac16
    almac16 is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Jan 2004
    Location
    Halifax, Nova Scotia, Canada
    --
    226
    Quote Originally Posted by Lots_Of_Nothing
    Are you sure its the wrong one? What is wrong about it? I have seen some people get pissed and think its the wrong one because they are trying to thread it in the usual way. The threads inthe flywheel are reverse. Meaning you turn the puller counter-clockwise to thread it into the flywheel. then you turn the bolt in the center of the puller clockwise to push against the crank.

    Just thought you better make sure that its the wrong one first.
    It's only half the size of what I need.

    They gave me K&N part 82-100 instead of 82-120
    Reply With Quote Reply With Quote
  5. 03-11-2005, 06:26 PM #5
    Lots_Of_Nothing's Avatar
    Lots_Of_Nothing
    Lots_Of_Nothing is offline So bombed at TF I needed both hands to hold my beer Teaching quads a lesson
    Join Date
    Oct 2002
    Location
    Upstate NY
    --
    2,665
    Quote Originally Posted by almac16
    It's only half the size of what I need.

    They gave me K&N part 82-100 instead of 82-120
    Alright, Just thought I would throw that out there and give the dealers a chance at being right (mine have yet to be correct on something )

    Good luck.
    Give me no lip and I tell you no lie.

    -TF 05' , And cant wait till 06!

    Reply With Quote Reply With Quote
  6. 03-11-2005, 06:28 PM #6
    almac16
    almac16 is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Jan 2004
    Location
    Halifax, Nova Scotia, Canada
    --
    226
    Yeah they are usually good out here. I had a new girl serve me, maybe it was her.

    I am looking forward to getting my motor back together too!

    Hopefully they have the one I need in stock as they supposedly order this one for me
    Reply With Quote Reply With Quote
//ArrowChat Integreation Code //