Results 1 to 7 of 7

Thread: Pics of my new Tigers..

  1. #1
    Join Date
    Jan 2003
    Location
    Belsano, PA
    --
    1,387

    Pics of my new Tigers..

    Well, that title was kinda misleading. The pics ARE the Tigers, but they were taken back in the 90s. I stopped today to talk to the owner and see if I might be able to sneak a few pics of them. He couldn't leave his shop, and so this is the best I could get. They let me look through an old photo album and take a couple pics with me to scan in. They are going to REALLY attempt to dip out the stuff this weekend for me. I guess showing up with some cash and pleading my case just may have worked. We'll see. Anyway, here are a couple shots of the Tigers in action. The one track they raced at was huge and they were clocked at OVER 100MPH on this machine. He was runnin 21" Hoosiers with the tallest gearing he could get and STILL couldn't pass some guys(higher gears & it would have run much faster). Crazy for sure. On the smaller tracks, where his gearing would work right, he said this 500 COULD NOT be beat. Took many 1st with it. They only quit racing it when it became evident that the costs were going to be too high to maintain the engines. (Their supply of spare parts ran out and had to go out of house to buy) He reluctantly retired the Tigers and switched over to a KTM for a while, then lastly Honda 250Rs. He even put the big Rotax into a 250R frame and dominated with it for a few years. Anyway, these are the actual Tigers I will be getting soon.....I hope! If you look real close on the one picture, you can still see the "Tiger" sticker on the stock tank peekin out the bottom near his leg. They busted up the 500 fenders and started using the 200/250 ones later on. Not a bad looking conversion actually.
    Attached Images Attached Images
    Last edited by SpeedBump; 04-18-2005 at 10:32 PM.

  2. #2
    Join Date
    Apr 2004
    Location
    International Falls Minnesota
    --
    546
    Those tigers look just like a 250R. They are cool though. Are you gonna buy them?

  3. #3
    Join Date
    Jun 2004
    Location
    potsdam ny
    --
    1,227
    wow, i thogught they only made 500cc three wheelers.....those are sweet though, wow i would love to have one.....
    1985 Honda ATC250R drag trike with s/t kit and full drag CR hybrid motor and drag chassis...
    1986 Honda ATC250R daily rider fully modded engine, +4 swinger,etc...
    1997 Polaris Storm 800 triple, boyesen reeds, dg individual silencers, 240 studs, 123mph on radar...

  4. #4
    Join Date
    Nov 2002
    Location
    Kirkville, NY
    --
    3,831
    hrc- they are the Tiger 500 that has been converted over to a quad using a suzuki front ends.

    Speedbumb - they look sweet, it looks like the conversion was done well too.
    1984 Yamaha YT 60 Tri Zinger(current project)
    1983 Yamaha YTM 200 (rear suspension kit)..... long term project
    2004 BMW R1150R
    1972 Honda CT 70
    2007 Lifan 110

  5. #5
    toyota200x's Avatar
    toyota200x is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Feb 2003
    --
    402
    Wow that would be awesome to have one. Is it in good shape still?
    Owner of
    '98 klx 300r
    '85 250sx
    '82 185s

  6. #6
    Join Date
    Jan 2003
    Location
    Belsano, PA
    --
    1,387
    Unfortunately no, they are not. They are all in pieces. There should be enough to build at least one good 3 wheeler out of all the parts, except for an engine. I have a contact to cover that part...just gonna cost some serious $$$$. I just wish I could get them to the house to be able to start on them.

  7. #7
    Join Date
    May 2005
    Location
    wisconsin
    --
    26
    you guys have no idea how bad i want a Tiger
    1987 Honda Trx 250r
    LRD attitude no link frame
    LSR no link swinger
    PEP zps no link shock
    Leagers +2 +1 a-arms
    RPM +4 axle
    LSR antifade lock nut
    LRD pipe and scilencer
    CT 370cc kit
    V-force reeds
    Hot rod crank
    Ported and polished
    Ac racing nerfs grab bar
    Fullbore plastcs
    Works shocks (getting rida for some ZPS PEP's)
    OMF air scoops
    There is more but i cant fit it all in

    1984 Honda 200x
    Curtuis sparks pipe
    Moose bars
    UNI filter
    Hondaline

//ArrowChat Integreation Code //