Handlebars. for the SX.

[bigredhead]

I currently got a Chromed bar ( from a big reg probably ) on my SX.

It's tweaked and just not cuttin it.

I'd like a Renthal with the foam thingy, but can you still mount the keyed ignition with one of these ?

What would you recommend for aftermarket !???

anyone ?

[ewalker302]

I've been wanting some new bars for my sx too.
My bars have been bent and straightened way too many times.

Is the renthal atv bend the best bend for the sx?

I have some renthal bars with the round foam on the brace on my ex.
I'll check the clearance and see if it would get in the way of the sx's dash.

[Macs]

what i have always done is order bars for a cr250 or if i want something a little higher i get the xr 400 bars. go through rocky mountain atv. i have been getting the tusk t-7 bars. they are dirt cheap, light and seem to hold up to alot. the only diffrence between these and atc bars is the price and the knurles are a little inward. it still works great but they stick out more on the inside of the triple tree clamps and after the pad is on you cant even see it.

[ewalker302]

I checked and the renthal bars with the round cross pad would work on an sx, but you might have to remove the pad (just the pad not the cross bar itself) to get the key in and out, and of course the pad will hide the reverse and neutral lights.

There is about 1 3/4" from the top of the bars in between the clamps to the bottom of the pad on the renthals.