Results 1 to 5 of 5

Thread: Question about a 125m hi low gear box

  1. #1
    Join Date
    Nov 2003
    --
    761

    Question about a 125m hi low gear box

    If the hi lo gear box goes bad on a 125m can * just remove the hi lo box because the trans itself shifts fine.

    if you can how hard is it to replace that hi lo gear box?

    1983 Honda 110
    1967 Mustang

  2. #2
    Join Date
    Nov 2003
    Location
    Houston,Texas
    --
    1,044
    You can't remove the gear box because the bike will not move. I took a high lo gearbox apart, and there isn't much to them. Whats wrong with the gearbox that on there? And when you put the gearbox back together, don't freak if you can't figure out how oil gets in. It comes in through the sprocket shaft I think.
    "I am going out of this world.....the same way I came in...screaming and covered in blood."

  3. #3
    Join Date
    Nov 2003
    --
    761
    Its on a trike im thinking about getting,so * dont have to split the cases or anything to take it apart the gear box just comes off the side of the motor?

    1983 Honda 110
    1967 Mustang

  4. #4
    Join Date
    Nov 2002
    Location
    Kirkville, NY
    --
    3,831
    Quote Originally Posted by 42F67N
    Its on a trike im thinking about getting,so * dont have to split the cases or anything to take it apart the gear box just comes off the side of the motor?
    Thats right, it is not hard to replace with a good used one.
    1984 Yamaha YT 60 Tri Zinger(current project)
    1983 Yamaha YTM 200 (rear suspension kit)..... long term project
    2004 BMW R1150R
    1972 Honda CT 70
    2007 Lifan 110

  5. #5
    Join Date
    Aug 2004
    Location
    Ab Canada
    --
    4,368
    4 screws and 5 mins to replace them no case splitting requierd
    1985 Tri-Z-

    Quote Originally Posted by mywifeknowseverything
    Just hit the Freakin Gas and Hold on!!!!!

//ArrowChat Integreation Code //