Power User
Teaching quads a lesson
well fox, from what I have seen, the rear ends are VERY similar, if not the same. I mean, both hard tail, both with rear mounted engines, both share the carrier, axle hubs, etc..... Why woudl it NOT work on a 200?? Even if it did not "fit" Im sure it could be mounted and spaced properly to make it work as well as it does on the "correct" machine, you know?
Haspin veteran '02, '03, '04, '05
"Hey is your dash-cam on? Are we gonna be on C.O.P.S?"
RECOVERING Trikeaholic
Power User
Lord of the trike
Look what you did; now I may have to tare apart my 200 even though it is just about done. Maybe the 200x project completion date will be pushed back again. Now that I think of it my brother has his YT125 are my parent’s house so when I get back from college I will have to compare them. Not that it makes much of a difference since the chances of me finding the swinger kit are slim but at least it would give me something to model it from. Are there any quads that use similar rear ends? I would rather not have to replace the rear end if I could get away with it. I would probably cut down a quad one so the rear end doesn't stick way out too.
1984 Yamaha YT 60 Tri Zinger(current project)
1983 Yamaha YTM 200 (rear suspension kit)..... long term project
2004 BMW R1150R
1972 Honda CT 70
2007 Lifan 110
Power User
Teaching quads a lesson
I guess if you used the same basic dimensions and were a savvy fabricator, you could make a swingarm for anything.
Haspin veteran '02, '03, '04, '05
"Hey is your dash-cam on? Are we gonna be on C.O.P.S?"
RECOVERING Trikeaholic
Power User
Lord of the trike
That’s the thing, I don't want to make the swinger, the other parts may be doable put I am hoping to be able to modify an existing swinger to fit. I will just have to find a cheap one that won’t matter if it ends up getting junked.
1984 Yamaha YT 60 Tri Zinger(current project)
1983 Yamaha YTM 200 (rear suspension kit)..... long term project
2004 BMW R1150R
1972 Honda CT 70
2007 Lifan 110
Got The Holeshot
Arm chair racerJust too addicted
Just found this thread, i have a full suspension pro tec 175 in the classifieds if anyones interested
Registered User
New to the board
Wasnt trying to robOriginally Posted by thefox
Holic, you said that it might fit the Yamy 200 alsoyour giving me some ideas now
.
post but i have no idea what i am doing, with that being said, i have a question, is the 85 yamahauler frame race worthy to build off of? Again sorry but thx in advance for any info
Power User
Catch me if you can
Depends which race you’re planning to enter.Wasnt trying to rob
That trike was built for the human race and not much else.
Power User
Got the holeshot
Is this still for sale?
Reply With Quote