Page 1 of 3 1 2 3 LastLast
Results 1 to 15 of 39

Thread: honda200s1984 - Thank you so much - great 225!

  1. #1
    Join Date
    Jan 2005
    Location
    Slatington PA
    --
    4,372

    honda200s1984 - Thank you so much - great 225!

    Honestly this thing will turn out every but as good as my others. Not bad, not bad at ALL

    I took a measly hour to wash the thing up 1/2 decent and it's amazing what a simple wash job did for it.

    If the motor turns out to run decent, which I see no reason why not, this thing will end up being nicer then your 200S!

    The muffler which I thought was rust was only dirt! Fine shape it is.

    The seat only needs to be patched at the location shown and small typical minor ones that tear at the seams underneath. the ones underneath just need to be stitched back up.

    The bars I straigten out with my own HE-MAN strength. Well not totaly but a heck of a lot better then they were.

    The camo paint seemed to preserve the schroud graphics also. I took 10 minutes with super fine steel wool and look at it.........IT's GREAT!

    It really doesn't look all that bad with that paint job either. When I 1st saw it I thought who would do such a thing , but all in all it's not so bad. I will take it off though.

    The rear fender mud flaps (all 4) are A-OK also. Rear fender should come out really nice also.

    Anyway here are some wash job picks. NO WAY is this turning into a parts bike. Most likely set till winter or at least till i get my other 2 done.

    Thanks again!!!
    Attached Thumbnails Attached Thumbnails 225 # 3 LS.jpg   225 # 3 RS.jpg   225 # 3 schroud graphic.jpg   225 # 3 engine LS.jpg   225 # 3 engine RS.jpg   225 # 3 seat.jpg  


  2. #2
    Join Date
    Jan 2005
    Location
    Slatington PA
    --
    4,372
    Even the rear turned out 1/2 decent.

    Trike need alot of TLC yet but for sure it will come out looking fine.

    Hey, that light schroud you gave me, it's for a 200 but will still fit I see.

    Learn something new everyday about these things.
    Attached Thumbnails Attached Thumbnails 225 # 3 rear.jpg   225 # 3 whole seat.jpg  
    Last edited by Huffa; 05-08-2005 at 08:51 PM.

  3. #3
    Mike_Ham_250R's Avatar
    Mike_Ham_250R is offline Even team-red-rider is cooler then me. Arm chair racerJust too addicted
    Join Date
    Dec 2004
    Location
    Pennsylvania
    --
    1,058
    Wow! That cleaned up nice! Good job
    -Mike

  4. #4
    Mike_Ham_250R's Avatar
    Mike_Ham_250R is offline Even team-red-rider is cooler then me. Arm chair racerJust too addicted
    Join Date
    Dec 2004
    Location
    Pennsylvania
    --
    1,058
    That engine looks awesome!
    -Mike

  5. #5
    Join Date
    Jan 2005
    Location
    Slatington PA
    --
    4,372
    Hey thanks.

    Give me a few months and you'll wish you had kept it.

    Maybe I'll sell it back to you but you'll have to drive alllllllll the way out here this time.

    I'll have a coke ready for your mom and a for your Uncle.

  6. #6
    Mike_Ham_250R's Avatar
    Mike_Ham_250R is offline Even team-red-rider is cooler then me. Arm chair racerJust too addicted
    Join Date
    Dec 2004
    Location
    Pennsylvania
    --
    1,058
    Quote Originally Posted by Huffa
    Hey thanks.

    Give me a few months and you'll wish you had kept it.

    Maybe I'll sell it back to you but you'll have to drive alllllllll the way out here this time.

    I'll have a coke ready for your mom
    Haha
    -Mike

  7. #7
    Mike_Ham_250R's Avatar
    Mike_Ham_250R is offline Even team-red-rider is cooler then me. Arm chair racerJust too addicted
    Join Date
    Dec 2004
    Location
    Pennsylvania
    --
    1,058
    If you are gonna get it runnin and stuff i cant wait to see the finished product
    -Mike

  8. #8
    Join Date
    Jan 2005
    Location
    Spruce Head Island, Maine
    --
    893
    i like that with the camo she looks animal.
    1983 Honda ATC 200x-shes a beater

    Past Rides:
    1982 ATC Big Red 200e (miss it more than i thought i would)
    1985 200x rode it for about a mile

  9. #9
    Mike_Ham_250R's Avatar
    Mike_Ham_250R is offline Even team-red-rider is cooler then me. Arm chair racerJust too addicted
    Join Date
    Dec 2004
    Location
    Pennsylvania
    --
    1,058
    Quote Originally Posted by Huffa
    Even the rear turned out 1/2 decent.

    Trike need alot of TLC yet but for sure it will come out looking fine.

    Hey, that light schroud you gave me, it's for a 200 but will still fit I see.

    Learn something new everyday about these things.
    Really? I think thats what came with it... it was on and worked before...
    -Mike

  10. #10
    Join Date
    Dec 2004
    Location
    Pa.'s Highest City
    --
    8,058
    I don't know why people need eveything camoflauged...Don't they Know deer are colorblind?

    Huffa...Your gonna have to start building an addition on to your garage pretty soon. Next time you come across a $100 trike let ME know! My 200x is quite lonely. lol

    BTW nice score
    Last edited by chris200x; 05-08-2005 at 10:16 PM.

  11. #11
    Mike_Ham_250R's Avatar
    Mike_Ham_250R is offline Even team-red-rider is cooler then me. Arm chair racerJust too addicted
    Join Date
    Dec 2004
    Location
    Pennsylvania
    --
    1,058
    Quote Originally Posted by chrisr200x
    I don't know why people need eveything camophlaged...Don't they Know deer are colorblind?

    Huffa...Your gonna have to start building an addition on to your garage pretty soon. Next time you come across a $100 trike let ME know! My 200x is quite lonely. lol

    BTW nice score
    Chrisr200x-Where abouts in PA are you... if i sell a trike for cheap ill drop ya a PM!!
    Last edited by Mike_Ham_250R; 05-08-2005 at 09:32 PM.
    -Mike

  12. #12
    Join Date
    Jan 2005
    Location
    Slatington PA
    --
    4,372
    Quote Originally Posted by honda200s1984
    Where abouts in PA are you... if i sell a trike for cheap ill drop ya a PM!!
    Slatington PA - You did the mapquest for me so you should know???

    Waaaaay east of you. 287 miles to be exact and 4.5 hours or so.

    I noticed something peculiar about the way the engine is painted

    Both 83 & 84 that I have, have the inside cases NOT painted. This 83 is painted but appears to be factory. I mean it looks factory but I don't see how that could be on the same years having 2 different paint schemes?

    Did you paint that and if so it's holding up quite well. Paint on the cylinder & head are stock for sure and held up better then my other ones!

    ALWAYS keep me in mind if you see a trike for sale, even if it looked as crappy as yours did.

  13. #13
    Mike_Ham_250R's Avatar
    Mike_Ham_250R is offline Even team-red-rider is cooler then me. Arm chair racerJust too addicted
    Join Date
    Dec 2004
    Location
    Pennsylvania
    --
    1,058
    Quote Originally Posted by Huffa
    Slatington PA - You did the mapquest for me so you should know???

    Waaaaay east of you. 287 miles to be exact and 4.5 hours or so.

    I noticed something peculiar about the way the engine is painted

    Both 83 & 84 that I have, have the inside cases NOT painted. This 83 is painted but appears to be factory. I mean it looks factory but I don't see how that could be on the same years having 2 different paint schemes?

    Did you paint that and if so it's holding up quite well. Paint on the cylinder & head are stock for sure and held up bit better then my other ones!
    Oh about where in Pa are you I was talking to chrisr200x lol... but no i didnt do anything to the engine... it is in the exact condition as i bought it
    -Mike

  14. #14
    Join Date
    Jan 2005
    Location
    Slatington PA
    --
    4,372
    Chris is about 40 minutes from me up in Beaver Meadows. Oh yea, Isee you adress that to Chris. I must be blind too?


    Hey, maybe that was a one off paint job Yamaha did and you sold me the only one made!

  15. #15
    Join Date
    Dec 2004
    Location
    Pa.'s Highest City
    --
    8,058
    I'm right outside of Hazleton, Pa. About 5 hours east of Pittsburg. I live in EAGLE country! lol

//ArrowChat Integreation Code //