125m help please

[42F67N]

awww man this trike blows i hadda cut the brake drum off and the damn axle still wont come out the sproket also wont come off the axle,i hit the axle with a 5 pound sledge and it dosent budge now something inside the frikkin carrier is stopping the axle from coming out...ive exhuasted every option i can think off only thing i can do now is part the trike out or look for a roller and swap all my stuff into it.

I have 3 nights about 2 1/2 hours per night trying to remove this axle and all ill say is this damn honda is tough cause im beating the crap outta it and still nothing

[ric]

Hope this might help you, otherwise, you have my sympathy, for all its worth!!

[42F67N]

I guess the axle is somehow getting hung up inside the carrier now?

only thing i can think to do is cut the carrier in half and just chopping till it all falls out.

[42F67N]

heee haw the axles out ,sadly it cost me a axle though o welp its out anyway,thanks for all the advice.

[fhportal]

PB Blaster (alot) and a 8" three jaw gear puller (Northern tools <$20) some cable 1/4" and two thimble clips (NortheRn Tools)... use the cable and make three loops that come out each of the six holes ( two wholes = one loop) in the drum attach the gear puller, center fits in center of axle and pull the **** out of it... mine would never have come off with out cutting.. for a while it didn't think I'd get it with the puller.... it was rusted on... Also make sure the brakes arent engaged on the drum as said above....

[42F67N]

I got it out this morning i had to cut the brake drum off and do some serious pounding on the axle to get it to come out the bearings inside the carrier were the worst ive ever seen the one side had like 3 or 4 bearings left lol.

the sproket is also stuck on the axle i tryed for a while to get it off then figured the heck with it ill buy a sprocket when i get another axle.

[jenndnn3]

After no subtranny and now the axle, You really gonna save this trike? Wow cudos to you!

[42F67N]

The damn thing runs perfect now lol i have to get the 2 last parts ive repaired the exhuast the bearings in the neck did some wiring work on it and fixed the carb i might as well get a axle and that sub trans and ride it lol

[Howdy]

I think I can fix you up with the parts you need. I need to check the sub to see if the gears are good. I know I have a axle, brake drum, sprocket, ect. Oh, and new rear bearing if needed also.
Howdy

[42F67N]

I have a entire new back end just need the axle,axle nuts the sprocket and the thing that holds the sprocket to the axle,im still looking for the sub trans also i have a few people that say they have them but they never get back to me so first guy to come up with one im gonna jump on it.

[longbedGTs]

Does the brake drum thread off the axle or what? Im having the same problem with my 84 125M. Ill cut the thing off if I have to.

...and yes, I realize this is an old thread. No need to mention it.

[longbedGTs]

Uhh, WTF just happened?
I just tried removing it by tapping the bottom of the carrier...and it came right off.
That was too easy I thought something was wrong. Everything looks fine though. Hmmm.