Just Too Addicted
Arm chair racerJust too addicted
My dad and i justpicked up this CJ2A for parts and maybe to restore later on. Anyways the motor is missing abunch of parts. Its the original L head motor and the oil fill tube if i pull on it it comes out of the block. I dont know if this is supposed to happen and my dads gone so i cant ask him. Does anyone know if its suposed to come out like that i dont think it should.
Aficionado of white surprise sauces.
Arm chair racerRoostin Away
I believe that it is supposed to screw in, and the threads are probably stripped. Either that or it should clamp in there. It should not just pull out.
1986 Honda ATC 200 S
Some quads and a S x S
-------------
Supporter of Uncle Rico's football camp. Since 1982.
If you are reading this in English, thank a U.S. Military VET. ΜΟΛΩΝ ΛΑΒΕ
Just Too Addicted
Arm chair racerJust too addicted
Thats what i thought ill have to look at it sometime today to see if it screws in.
At The Back Of The Pack
Arm chair racerFirst time rider
Don't know for sure about the old jeep motors but on the old Chevy motors(60's style) the fill tube pulls right out if you pull on it!
It ain't about the money, or even being #1, you gotta know when it's all over you did the best you could of done! And knowing that it's in you and you never let it out, is worse then blowin' any engine or any wreck you'll ever have!
----------
_________________________________
84 Tecate RED with a 310 Big bore!
84 Tecate Red
84 Tecate Green, in pieces(was a parts bike, not anymore!!
85 TECATE--NICE!
85 350x needs a little tlc
86 350x
86 TRI-Z
Reply With Quote