Results 1 to 5 of 5

Thread: 350x is too rich

  1. #1
    toyvette81 is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Jun 2005
    Location
    durham
    --
    284

    350x is too rich

    i just bought this bike, it would barely run on full choke the main jet was halfway clogged and the idol/low sped jet was 100% clogged up....... so i got it running great, & today was my first real ride on it besides up and down my street and it is running too rich, it fouled the plug within an hour. apparently i had it cleaned out enough up and down my street, (it's about a mile long ) but it does have some rich smoke when i get on it at the beginning of each gear, i generally know that 2 to 2&1/2 turns out on the mixture screw is a good place to start, does anyone know any different on this bike, i have not messed with it on this bike, i have only cleaned all the jets. or is there anything else i can do to lean it out. if anything i would have figured it needed a 142 jet b/c of the DG pipe which i suspect has no packing or baffles but i guess not.
    help me lean it out if you can
    thanks
    Last edited by toyvette81; 06-11-2005 at 05:16 PM.

  2. #2
    Mike_Ham_250R's Avatar
    Mike_Ham_250R is offline Even team-red-rider is cooler then me. Arm chair racerJust too addicted
    Join Date
    Dec 2004
    Location
    Pennsylvania
    --
    1,058
    I didnt even read the post but I suggest you rejet
    -Mike

  3. #3
    Join Date
    Sep 2004
    Location
    springville, PA
    --
    6,185
    take your air box cover off. See if that helps
    Nate

    The Myth, The MAN, The Legend
    R.I.P HRR

    Quote Originally Posted by honda250sx View Post
    Fact: Dr. Death is Bob from Enzyte.

  4. #4
    Join Date
    Oct 2002
    Location
    Fresno Ca
    --
    2,695
    With stock filter, and DG, 140, with k&n and dg 142. What main are you running now. If its above 142 then its probably rich, if its not i highly doubt that its rich.

  5. #5
    toyvette81 is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Jun 2005
    Location
    durham
    --
    284
    it has a 138 in it, i have not studyed it though. no 1 says that it hasn't been drilled out...... i figured 142 should be what it needs also, thanks

//ArrowChat Integreation Code //