Results 1 to 6 of 6

Thread: Nousagi X192 is up and running.....

  1. #1
    Join Date
    Mar 2005
    Location
    TEXAS-corpus christi
    --
    85

    Cool Nousagi X192 is up and running.....

    yup she started only right after i put starter fluid in the carb --- she runs great one thing tho it leaks from the carb drain bowl screw thing - im sure im gonna have to get that from the carb rebuilt kit --- WOW she is fast - its been great project a few headaches but darn well worth ever drip of swet.... is the shifting suppose to be kindof hard cuase i thought after the bike gets going it shifts easy but guess not another thing is i have to when like if i were to take it to 3 gear then id have to shift 3 back up to nuetral? one more thing like when im in 3 and want to stay on 3 and i slow down could i just leave it on 3 and just give it gas and keep going will i ruin any thing by doing this? it back fires a little so i think its a little rich right now the needle is in the 3 position im gonna move it down 1 into the 4th . i see now how much fun those trikes could be im flying aready only on 2 ................theFOX if you read this i dont need those part and check your pm .................................................. ......other than that would i be able to put a automotive tach to the coil and will it work?
    Attached Thumbnails Attached Thumbnails P1010169-2.jpg  

  2. #2
    Join Date
    Sep 2004
    Location
    springville, PA
    --
    6,185
    wrong forum.

    And the leaving it in third thing wont hurt it.
    Nate

    The Myth, The MAN, The Legend
    R.I.P HRR

    Quote Originally Posted by honda250sx View Post
    Fact: Dr. Death is Bob from Enzyte.

  3. #3
    Join Date
    Aug 2004
    Location
    Ab Canada
    --
    4,368
    Man that thing looks like some fun! did you build the frame yourself or use a small bike alredy? i ask becuse i may make one with a 80cc pinger in it to race in the mini bike class at the local track...
    1985 Tri-Z-

    Quote Originally Posted by mywifeknowseverything
    Just hit the Freakin Gas and Hold on!!!!!

  4. #4
    Join Date
    Mar 2005
    Location
    TEXAS-corpus christi
    --
    85

    welding was invovled

    from a x2 frame came added support and re constructed mounting position. i wish we had some sort of race league but we only ride empy parling lots and well i ride to the distination, thats pretty cool but were not suppose to cuase there not street legel but if their was a track i sure would be their........

  5. #5
    Join Date
    Jul 2004
    Location
    Mud hill. close to water !
    --
    3,658
    on these old 200's... N-1-2-3-4-5 and back.

    You can keep it in any gear you want as long as it has enough power to pull it. otherwise you'll wear the clutches out.. but at the weight of that thing.. i bet you could take off in 3rd.. LOL....

    Do you have it auto-clutch or manual ? what was the 200 motor from ? a 200 X.. S, M. E. etc.....
    Currently :

    82 ATC - 200, plain jane, almost mint. ( Sold, 03-17-2005)
    84 ATC - 200 ES, Jimmy-Rigged, don't ask.( Sold, 03-17-2005)
    85 ATC - 250 SX, Pride and Joy, Bottom-Less Money Pit.
    84 125 M - The Mini-SX not running yet. but won't be long.
    --

    The more people i meet.. the more i like my DOG !

  6. #6
    Join Date
    Mar 2005
    Location
    TEXAS-corpus christi
    --
    85

    trike forum.....

    would yall guys mind going the thread that i started with im gonna finish posting on that one i forgot about it -- thanks check out the lastest news - see yall their.............................Pete

//ArrowChat Integreation Code //