My 1983 185s's front sprocket is loose... like it can wiggle some and i was wondering how do I tighten it... I heard something about putting some sort of "key" in there, is that right? and if so where do I find one?
New to the board
Arm chair racerNew to the board
Tighten Front Sprocket
My 1983 185s's front sprocket is loose... like it can wiggle some and i was wondering how do I tighten it... I heard something about putting some sort of "key" in there, is that right? and if so where do I find one?
At The Back Of The Pack
Arm chair racerFirst time rider
im not an expert with trikes but i believe the front sprocket should be loose, there is a key that goes over the the sprocket when * slide it on the gear that stops it from comming off but i believe it should be kinda lose like it should wiggle around so that the chain can kinda flex when * turn
2000 426Ex
Too Much In The Motor To Talk About
+2+4 Axle
Lowering Kit
FCR Carb
!*Under Construction*!
2005 Blaster
cb750 4cylinder motor
!*Under Construction*!
Got The Holeshot
Arm chair racerJust too addicted
The countersprocket is supposed to "wiggle" a bit on the splined shaft. Leave it be.
New to the board
Arm chair racerNew to the board
ok sounds good, thanks
Reply With Quote