New to the board
Arm chair racerNew to the board
My unkel just got a 125 tri-moto in pretty rough shape. The guy we got it off of said it did run but what he forgot to mention was it dont move.Well I took the clutch cover off and found out the shaft is snapped at the end. There is a little round cam that drives a pump that I assume is for the oil injecton system also. How hard is it to change the shaft the clutch is on? Or would it just be easier to put the top end off that motor on our spair that needs it and swaping the whole motor?
1984 200x motor being rebuilt
1984 200s used for parts for the x
1984 125m Got for free now fixing up
At The Back Of The Pack
Arm chair racerFirst time rider
Theres only three bolts and some cable holding the motor in. It only takes like a half hour to yank it. As long as your spare is good just swap the top and put in the new motor
1980 trimoto 125 mods include a ripped seat broke fender and bent handle bars
1981 trimoto 125
1971 suzuki ts 185 it will spank a 200x
1966 gmc 3/4 ton
New to the board
Arm chair racerNew to the board
Got the bottom end swaped today. The problem im having now is as soon as I put it in gear the front end lifts and it just dies.It starts idles and revs ok so i have no idea whats wrong.
1984 200x motor being rebuilt
1984 200s used for parts for the x
1984 125m Got for free now fixing up
At The Back Of The Pack
Arm chair racerFirst time rider
check the oil in the trannie, if there isn't much oil the clutch won't slip. or your idle speed is to high, they need to idle pretty low to disengage the clutch. Or you could hold wide open and stomp the shifter.
1980 trimoto 125 mods include a ripped seat broke fender and bent handle bars
1981 trimoto 125
1971 suzuki ts 185 it will spank a 200x
1966 gmc 3/4 ton
New to the board
Arm chair racerNew to the board
rustbucket: I put about a qurt of oil in it and its up to the fill hole. It does idle a bit high so I will try turning it down a bit. I tried holding it wide open and poping it in gear but I ended up falling off on my head lol. I forgot the 125s wheelee so well.
1984 200x motor being rebuilt
1984 200s used for parts for the x
1984 125m Got for free now fixing up
Power User
Teaching quads a lesson
He was probably trying to tow a 2 ton Chevy truck with the brakes on.
08 Outlaw 525s
07 CRF70
04 Harley FLHRCI
04 TRX90
03 XR650R
03 400EX- XR650R engine
02 XR100R
01 Banshee
00 XR50R
00 XR70R
99 PW50
99 JR50
96,95 Sportsman 400
95 Xplorer 400
94 Indy XLT
87 Trail Boss
86,86,86,86,86 Scrambler
86 TRX70 x2
85 ATC350X
85,84 ATC250R
85 Red Tecate
85 LT50 x2
84 XR500R
84,84,84,84,83,82,80,79 ATC70
82,79 XL500R
83 ALT50
79,78,77,77,76 XT/TT500
76,75,74 XL70
72,71,71,71 SL70
72 Harley FX
72,71,70,70,70,70,70 CT70H
72 SL100
70,69 Z50
Twinkle Toes
The day begins with 3WW
Originally Posted by camaro71633
you actually tried that?!?! lift the rear in the air and shift. no resistance. also can you loosen up the clutches on those?
Nate
The Myth, The MAN, The Legend
R.I.P HRR
At The Back Of The Pack
Arm chair racerFirst time rider
when you gas it like that you need to sit on the tank. Is it possible that the nut came off the lever that is on the end of the shift shaft for the clutch? If that happens then the clutch wont disengage
1980 trimoto 125 mods include a ripped seat broke fender and bent handle bars
1981 trimoto 125
1971 suzuki ts 185 it will spank a 200x
1966 gmc 3/4 ton
Reply With Quote