New to the board
Arm chair racerNew to the board
today i cleaned the carb lol it probaly was my prob but know i have another problem there is a screw with a spring on the bottom of the bowl but on the outside of the bowl does this have a little washer if so does the washer go in before the spring or after ?lol and how tight do i retighten to ???????please help thanks in advance
New to the board
Arm chair racerNew to the board
anybody with atc 200 83?????
New to the board
Arm chair racerNew to the board
come on anybody gonna help big where * at lol
Formerly MNRebel
Arm chair racerJust too addicted
i never have taken it apart that far, however i will be taken it apart tomorrow, ill check 4 ya and let you know
Confused As A Hungry Baby In A Topless Bar!!!
'04 Honda CRF250R
'82 Honda 200 4'sale soon
'90 and '91 Arctic Cat Prowler 440
'81 Kawasaki LTD 440 Belt Drive!!
'92 Yamaha Warrior 350
'05 DS 90
Helmet save'd my friend's life, and mine, wear one!!!
Trying is the first step to failure
3ww Needs an iPhone app
Power User
Got the holeshot
Maybe if you gave people time and we could read what you typed/said, someone may be able to help you.
A clymers manual will tell you all the information you need.
New to the board
Arm chair racerNew to the board
well im new here and i guess the afternoon crew aint so grouchy lol and why dont someone have a page or two out of the maual thats what the internet is for so i thought anyways same prob hope someone will help thanks in advance.....
Power User
The day begins with 3WW
There is no "washer" for the air/fuel screw (you are talking about the upsidedown slotted one right? ) you have to play with it n run plug chops till you feel its right, in =richer out=leaner...hope this helps...if its the same screw where talkin bout here..lol
1985 Tri-Z-
Originally Posted by mywifeknowseverything
New to the board
Arm chair racerNew to the board
its on the bottom of the carbon the edge in the middle ,lolnot the one to drain the bowl
Power User
Lord of the trike
go to www.partsfish.com and look up the diagrams for the carb.. easy to do.
I'll check my manual in about 20 minutes. yeah it's the air/fuel screw .. i beleive it has the spring and that wather on top so the spring does not dig into the carb body .... be back in a few.
Currently :
82 ATC - 200, plain jane, almost mint. ( Sold, 03-17-2005)
84 ATC - 200 ES, Jimmy-Rigged, don't ask.( Sold, 03-17-2005)
85 ATC - 250 SX, Pride and Joy, Bottom-Less Money Pit.
84 125 M - The Mini-SXnot running yet. but won't be long.
--
The more people i meet.. the more i like my DOG !
Power User
Lord of the trike
ok specs for ATC 200.. plain 200..
Model:PD 35C
Main Jet No. 105
Initial pilot screw opening 81 - 2 turns out.. 82 - 2 1/8.... and 83 1 1/4 TURNS OUT !!
Needle Jet/Clip : 2nd gove
Float Level : 0.49 in ( 12.5mm)
Idle Speed: 1400 RPM + - 100
The pilot screw assembly should be
Bolt ... then put the spring on.... then the Flat Washer.. and then the RUBBER O-RING
then put all this into the carb... Turn all the way in until it seats.. don't overdo it as you don't want to crush the o-ring also make sure the old one is not still in there... or you will have problems.
Once you feel it bottom out slightly.. then turn 1 1/4 turns for the 83 and it should fire right up and you can adjust it after it's on the bike.
Currently :
82 ATC - 200, plain jane, almost mint. ( Sold, 03-17-2005)
84 ATC - 200 ES, Jimmy-Rigged, don't ask.( Sold, 03-17-2005)
85 ATC - 250 SX, Pride and Joy, Bottom-Less Money Pit.
84 125 M - The Mini-SX
--
The more people i meet.. the more i like my DOG !
New to the board
Arm chair racerNew to the board
lol so the washer goes into the carb the put the spring in the carb the the bolt o ring ??????
Power User
Lord of the trike
picture the carb in your left hand....
with the right hand.. put in the
0-ring first.
Then the Flat metal washer
Then the spring
Then the nut.
Currently :
82 ATC - 200, plain jane, almost mint. ( Sold, 03-17-2005)
84 ATC - 200 ES, Jimmy-Rigged, don't ask.( Sold, 03-17-2005)
85 ATC - 250 SX, Pride and Joy, Bottom-Less Money Pit.
84 125 M - The Mini-SX
--
The more people i meet.. the more i like my DOG !
New to the board
Arm chair racerNew to the board
* the the man 1 more lol then ready to start. the side screw it has a spring visible any suggestion ?
New to the board
Arm chair racerNew to the board
it is screw set b thats what the carb diagram says it is
Power User
Lord of the trike
That's the idle screw.
In all the way and then out 2 turns for starters... IN will make it idle faster..
OUT will slow down the idle.
Currently :
82 ATC - 200, plain jane, almost mint. ( Sold, 03-17-2005)
84 ATC - 200 ES, Jimmy-Rigged, don't ask.( Sold, 03-17-2005)
85 ATC - 250 SX, Pride and Joy, Bottom-Less Money Pit.
84 125 M - The Mini-SX
--
The more people i meet.. the more i like my DOG !
Reply With Quote
