i need some info or advice with my rear axle i thought it had bearings in it and that they were flogged out but when i pulled it apart there is no bearings now i dont know what parts i need to stop the swaying in my rear axle housing
New to the board
Arm chair racerNew to the board
i need some info or advice with my rear axle i thought it had bearings in it and that they were flogged out but when i pulled it apart there is no bearings now i dont know what parts i need to stop the swaying in my rear axle housing
Just Too Addicted
Arm chair racerJust too addicted
There are definitely bearings pressed into the axle carrier (aluminum center peice that the axle slides thru). If they were completely grenaded, you might only have the outer races left, but they are definitely there.
[FONT="Palatino Linotype"]~My Rides (to name a few) ~
1986 ATC250R, 1985 ATC350X
1985 ATC250R Missile (90% done)
1983 ATC185S
1999 TRX416EX
2003 Honda CBR600RR
1990 Yamaha Zuma
1985 XR80 w/100 motor
1967 Honda CB77, '65 CL77
1962 Puch 250 SGS
1984 XR350R (owned since I was a kid)
1972 Suzuki T350 Rebel, '73 T500 Titan
1964 BSA A65 (needs restored)
1968 BMW R60/2 mint original bike
1976 Kawasaki KH500 triple
Anybody have parts to trade for the above models?
Power User
Teaching quads a lesson
Yeah the carrier is the only place there are bearings on the axle. If the axle is loose, means you need new bearings or a new carrier.
86-87 Tecate ROCK!
Ride fast...........brake late............and Slide the rear!
New to the board
Arm chair racerNew to the board
yeah i found were they were supose to go i need new bearings and carrier thanks guys
Reply With Quote