This is taken out of my 85 200x.
Thankz
New to the board
Arm chair racerNew to the board
This is taken out of my 85 200x.
Thankz
The R
Power User
Lord of the trike
Im not very mechanically inclined but I say its ok :? Don't rely on just my opinion though.
[20:55] <waterpumper> putting a racing pipe on a Foreman is like putting a high dollar bikini on a 400 pound chick...just because it fits doesn't mean it looks cool
New to the board
Arm chair racerNew to the board
If it's okay, then should I at least clean that black stuff off the top of the piston??
The R
New to the board
Arm chair racerNew to the board
If you have already got it out, put a new one in. They are relatively inexpensive, less then $100. It could have small cracks or other problems you cant see.
However, it looks OK from the pictures, but it is hard to say.
Super Moderator
Just too addicted
As far as I can see, It looks like its in relatively decent shape. Since you arleady have the thing apart just slap a new one in there. Without taking tons of measurements, you have no way of knowing how long it will last.
Basic rule of thumb, if the motor is apart, take the time and money to give it a nice new bore and piston. Good practice to keep.
New to the board
Arm chair racerNew to the board
EXCELLENT, I will order a new piston kit from DK today.
The R
Reply With Quote