New to the board
Arm chair racerNew to the board
I just put together the fromt end of my 200es and hooked up the front brakes. I went for a short ride to test the front brake and noticed that when I hit the front brake the front forks looked like they were jointed. They were flexing each time I hit the the brake. So now i gotta fix this. So what needs to be replaced? I looked at the clymer manual and they look pretty basic. Do I just need new guides and the spacers?
At The Back Of The Pack
Arm chair racerAt the back of the pack
Chances are its just the guides. They wearout on the front side first.
'02 ranxher 4x4 '83 big red '84 110, '86trx70 project, '85 bigred project
At The Back Of The Pack
Arm chair racerAt the back of the pack
Guides (4), spacers (2), retaining clips (2) and lots of Bel-Ray grease....bout $50.00.
Registered User
First time rider
I put a 200m front end on my Big Red and it works about 100% better. It didn't cost much either thanks to ebay.
New to the board
Arm chair racerNew to the board
Im gonna look om ebay. I thought it was the guides and spacers bc there isn't much too those shocks.
Reply With Quote