need chain help, ASAP!

[monster 84r]

OK guys i need some help fast. im going riding tomorrow, and i need your help to be able to go. i went from a 15t front sprocket to a 13t on my 250r, and now the chain is wayyy to loose. i tightened it all that it would go. so i have to cut a link. i dont have a chain breaker or whatever it is, but i have a dremel tool. how do i cut a link? someone help me FAST!

[mikey's250sx]

you can remove the master link and with a socket and punch remove a link and re-install the master.

you can also get chain breakers at any auto parts store for about 10 bucks and it will save you lots of time and effort

[monster 84r]

i dont think i have a socket punch, what could i use to improvise?

[monster 84r]

wait i do have sockets, like spark plug sockets and etc. and a nail punch, how would i get the link out? how would i exactly remove a link?

[monster 84r]

ok i need replies fast! will this chain be rideable? i know its loooose, but is it ridable? let me know guys!!!!

[sblt500r]

before you cut it make sure that you have enough adjustment to take up the slack before you cut out a link. if you cut out too much you aren't going ridding to you get a new chain.

do you have a cut off wheel for the dremel?

[TimSr]

Its way too loose, and R's are famous for throwing chains, as they dont have a chain guide on them.

Grind the ends of the pins off flush where shown in the picture. Grind flush and right on into the side plate a little bit. Then lay it on a hard surface, preferably cement, and use a chisel or screwdriver to force the side plate off by wedging it in between with a sharp whack of a . The R has plenty of adjustment and you wont come up short if its all the way tight right now.

[monster 84r]

thank you timsr. so much, im gonna go try this. in the picture i have it tightened all the way, so i think it will work. i owe you big time man!

[sblt500r]

i never tried that. seems easier than what i do. i grind off one of the pins then bang it out with a punch.

[monster 84r]

ok guys im still screwed. i took out the link, and adjusted the chain as far foreward as it will go. now it is so tight i cant move it. will it stretch out, or snap? someone please help me i dont know what to do! how can i stretch the chain?

[ATCnut]

You need a half link.

[monster 84r]

ive never heard of one of those, can i get one at a local shop? i need a quick fix man, im going riding tomorow and my chain is way too tight.

[monster 84r]

if i ride it the way it is tomorrow, will it snap? what if i ride it easy? help me out guys, haha im only 15, i aint exactly a mechanical genious.

[monster 84r]

where could i get a half link? what could i do for a quick fix?any help much appreciated.

[84honda 200X]

You can get a half link at a dealership i know they have them there. Also maybe a hardware shop maybe! But i wouldnt ride it like that it could throw out your rear bearings or snap.