looking for passenger implements --

**Maine_Triker** · 07-26-2005, 09:39 AM

OK... all you have to do is get some of those fender protector thingys off a quad... and modify them to connect to the rack and the brush guard (see pic). Then all you have to do is attach footpegs to the fender protectors!

Now I don't even know if you can get brush guards for the SX... so you could have someone make fender protectors that also go underneath the trike in back of the motor!

Follow me?

**erics_250sx** · 07-26-2005, 09:49 AM

good work on that, triker!

e

**atctim** · 07-26-2005, 03:16 PM

Here's a set I made:

http://www.3wheelerworldforums.com/s...ghlight=safety

**Maine_Triker** · 07-26-2005, 04:59 PM

OK.. I painted in what it would look like on a Big Red.
You could even make the bars in a certain way, so that the pegs could slide up and down depending on the height of the passenger

Phil

**350x'inNY** · 07-26-2005, 05:58 PM

Originally Posted by 250sxwheeliepop

it may not be hondaline but cabelas meets your every need

http://www.cabelas.com/cabelas/en/te...ainCatcat21412

at bottom. DirtyDan gas one and it makes riding ***** so much nicer

That's very similar to the thing i'm talking about I bought at WalMart...

Thread: looking for passenger implements --

Thread Tools

Footpegs