Results 1 to 5 of 5

Thread: CR forks on '86 ATC 250R

  1. 08-03-2005, 12:03 AM #1
    esande151
    esande151 is offline New to the board Arm chair racerNew to the board
    Join Date
    Jun 2005
    Location
    florida
    --
    35

    Question CR forks on '86 ATC 250R

    Does anyone know how this is done? I've seen it in a few pictures, but not close enough to see how it was done.
    Reply With Quote Reply With Quote
  2. 08-03-2005, 01:56 AM #2
    Red Rider's Avatar
    Red Rider
    Red Rider is offline Wires, Hoses, & Digital Wizardry. Got the holeshot
    Join Date
    Oct 2003
    Location
    Las Vegas, NV.
    --
    2,489
    Since the stock ATC triple clamps cannot be bored out big enough to accomodate the inverted forks, most people that have done the swap have had the clamping portion of the CR triple clamps welded onto the ATC triple clamps. A few people have talked about having new billet triple clamps milled, but I don't know if anyone has actually done this yet.
    Red Rider's Sand Machine Updated 07/23/14
    Reply With Quote Reply With Quote
  3. 08-03-2005, 03:31 AM #3
    350xsx's Avatar
    350xsx
    350xsx is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Jun 2004
    Location
    Tinton Falls NJ
    --
    348
    Quote Originally Posted by Red Rider
    Since the stock ATC triple clamps cannot be bored out big enough to accomodate the inverted forks, most people that have done the swap have had the clamping portion of the CR triple clamps welded onto the ATC triple clamps. A few people have talked about having new billet triple clamps milled, but I don't know if anyone has actually done this yet.
    ive seen and talked to a couple people who have gotten custom tripple clamps made, with is actually pretty simple for someone who knows how to operate a CNC machine, but if you dont have access to someone who does, you should make a new friend
    Reply With Quote Reply With Quote
  4. 08-03-2005, 08:20 AM #4
    OldSchoolin86's Avatar
    OldSchoolin86
    OldSchoolin86 is offline Within Arms Reach Of The Master Arm chair racerLord of the trike
    Join Date
    May 2002
    Location
    Southeastern Wisconsin
    --
    3,658
    Quote Originally Posted by esande151
    Does anyone know how this is done? I've seen it in a few pictures, but not close enough to see how it was done.
    http://www.3wheelerworldforums.com/s...light=cr+forks
    Reply With Quote Reply With Quote
  5. 08-03-2005, 07:21 PM #5
    esande151
    esande151 is offline New to the board Arm chair racerNew to the board
    Join Date
    Jun 2005
    Location
    florida
    --
    35
    Thanks for the info OldSchoolin
    Reply With Quote Reply With Quote
//ArrowChat Integreation Code //