Post Count: Starting over
Arm chair racerRoostin Away
Ok guys. I am looking to finish up this restore (all except the frame and plastics, of course) this week, and I need some help with the grabbar/taillight.
Would this:
http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWA%3AIT
mount up to:
http://prm-atv.com/MN.asp?pg=products&grp=35&mfr=2
the standard grabbar??
If not, what taillight WOULD mount up to it that is not from like a 250R or something? I want a LED taillight, atleast.
Thanks guys!
'85 250SX - My first ever trike and my pride and joy
**Check Out The Whole SX Project Here!!**
'85 350X - 10:1 Piston, performance cam, '86 engline/carb
'85 Powervalved Tri-Z - Fully modded - Soon to have a Corey Sprock 310 kit
'85 250R - Began the modification process. This bike is going to scream! -295cc kit, Ported, Drag intake, 40mil Keihin, VForce reeds, shaved head, PT High Rev pipe, Fat Boy 2 Silencer, +4 Durablue axle, +2 swinger-
Just Too Addicted
Arm chair racerJust too addicted
If you're looking to mount a light to that grtab bar, looks to me like yer gonna have to drill some holes and fabricate some bracketry no matter what light you choose. Doesn't look to me like the bar comes with any provision for mounting a light on it. I'm sure you could use that cross light (not sure why you'd want to), but you are going to have to devise a way to mount it.
[FONT="Palatino Linotype"]~My Rides (to name a few) ~
1986 ATC250R, 1985 ATC350X
1985 ATC250R Missile (90% done)
1983 ATC185S
1999 TRX416EX
2003 Honda CBR600RR
1990 Yamaha Zuma
1985 XR80 w/100 motor
1967 Honda CB77, '65 CL77
1962 Puch 250 SGS
1984 XR350R (owned since I was a kid)
1972 Suzuki T350 Rebel, '73 T500 Titan
1964 BSA A65 (needs restored)
1968 BMW R60/2 mint original bike
1976 Kawasaki KH500 triple
Anybody have parts to trade for the above models?
Post Count: Starting over
Arm chair racerRoostin Away
Ok. Well whats the right amperage or w/e? Could I get any taillight??
I've been looking at:
http://cgi.ebay.com/ebaymotors/YAMAH...70162890QQrdZ1
Is that the right amperage? Would it hook up correctly?
'85 250SX - My first ever trike and my pride and joy
**Check Out The Whole SX Project Here!!**
'85 350X - 10:1 Piston, performance cam, '86 engline/carb
'85 Powervalved Tri-Z - Fully modded - Soon to have a Corey Sprock 310 kit
'85 250R - Began the modification process. This bike is going to scream! -295cc kit, Ported, Drag intake, 40mil Keihin, VForce reeds, shaved head, PT High Rev pipe, Fat Boy 2 Silencer, +4 Durablue axle, +2 swinger-
Post Count: Starting over
Arm chair racerRoostin Away
Noone?? I'm hoping to get this taillight tonight or tomorrow morning.. help fast!
'85 250SX - My first ever trike and my pride and joy
**Check Out The Whole SX Project Here!!**
'85 350X - 10:1 Piston, performance cam, '86 engline/carb
'85 Powervalved Tri-Z - Fully modded - Soon to have a Corey Sprock 310 kit
'85 250R - Began the modification process. This bike is going to scream! -295cc kit, Ported, Drag intake, 40mil Keihin, VForce reeds, shaved head, PT High Rev pipe, Fat Boy 2 Silencer, +4 Durablue axle, +2 swinger-
Aficionado of white surprise sauces.
Arm chair racerRoostin Away
I wish I could help you. I don't know, but I have seen people use the LED trailer lights, like for a boat trailer, and it work on their quad. It looks trick. Bet it would work on the trike! I am not an electrical wizard, so I cannot answer your questions about amperage. I can tell you than a trailer LED taillight, purchased at wal-mart, works on my buddy's 400 EX and looks good. Clear until you grab the brake or switch on the running lights. A little angle aluminum or some diamond plate for a mo0unting bracket, and I think it could look damn trick. Again- My opinion. Just trying to help.
1986 Honda ATC 200 S
Some quads and a S x S
-------------
Supporter of Uncle Rico's football camp. Since 1982.
If you are reading this in English, thank a U.S. Military VET. ΜΟΛΩΝ ΛΑΒΕ
Trikein' Away
Arm chair racer4 Wheels? Huh?
I bought a prm grab bar for my z and it didn't have a tail light mount. I had to make one myself.
1985 YAMAHA TRI-Z 250 sold
2006 YFZ 450
Post Count: Starting over
Arm chair racerRoostin Away
Ok. Thanks guys. Now all I need to know is if its the right amps
'85 250SX - My first ever trike and my pride and joy
**Check Out The Whole SX Project Here!!**
'85 350X - 10:1 Piston, performance cam, '86 engline/carb
'85 Powervalved Tri-Z - Fully modded - Soon to have a Corey Sprock 310 kit
'85 250R - Began the modification process. This bike is going to scream! -295cc kit, Ported, Drag intake, 40mil Keihin, VForce reeds, shaved head, PT High Rev pipe, Fat Boy 2 Silencer, +4 Durablue axle, +2 swinger-
I have more Lip than Brains
Roostin Away
why not just buy a used one.
Rest in peace Rex Carlson
Just Too Addicted
Arm chair racerJust too addicted
You dshould not have a problem with the voltage or amperage running any of those quad taillights. LED generally has less amperage draw than regular incandescent bulbs. Don't worry about the power draw, go ahead and get the one you want. Your main concern will be the mounting bracketry.
[FONT="Palatino Linotype"]~My Rides (to name a few) ~
1986 ATC250R, 1985 ATC350X
1985 ATC250R Missile (90% done)
1983 ATC185S
1999 TRX416EX
2003 Honda CBR600RR
1990 Yamaha Zuma
1985 XR80 w/100 motor
1967 Honda CB77, '65 CL77
1962 Puch 250 SGS
1984 XR350R (owned since I was a kid)
1972 Suzuki T350 Rebel, '73 T500 Titan
1964 BSA A65 (needs restored)
1968 BMW R60/2 mint original bike
1976 Kawasaki KH500 triple
Anybody have parts to trade for the above models?
Post Count: Starting over
Arm chair racerRoostin Away
No. Mounting bracketry is going to be no problem. One of my grandpa's friends is a very good welder and he has done some stuff for me on this bike, and he's done a great job on all of it. I'm going to take the grabbar, taillight, and picture of the stock setup to him and tell him to go at it.
'85 250SX - My first ever trike and my pride and joy
**Check Out The Whole SX Project Here!!**
'85 350X - 10:1 Piston, performance cam, '86 engline/carb
'85 Powervalved Tri-Z - Fully modded - Soon to have a Corey Sprock 310 kit
'85 250R - Began the modification process. This bike is going to scream! -295cc kit, Ported, Drag intake, 40mil Keihin, VForce reeds, shaved head, PT High Rev pipe, Fat Boy 2 Silencer, +4 Durablue axle, +2 swinger-
Reply With Quote