ok.. you have an SX with 200 X front forks !! good deal man .. that's awsome ! You can put disk brakes on the front if you want !.. cool.
Re-route that cable that is touching the header pipe before it melts thru and ruins your cable....
Power User
Lord of the trike
ok.. you have an SX with 200 X front forks !! good deal man .. that's awsome ! You can put disk brakes on the front if you want !.. cool.
Re-route that cable that is touching the header pipe before it melts thru and ruins your cable....
Currently :
82 ATC - 200, plain jane, almost mint. ( Sold, 03-17-2005)
84 ATC - 200 ES, Jimmy-Rigged, don't ask.( Sold, 03-17-2005)
85 ATC - 250 SX, Pride and Joy, Bottom-Less Money Pit.
84 125 M - The Mini-SXnot running yet. but won't be long.
--
The more people i meet.. the more i like my DOG !
At The Back Of The Pack
Arm chair racerAt the back of the pack
As high as the front end is sitting it might be a 350X front end on there. Not sure but all the 200X front ends I have seen sit pretty much level (Stock). Anyone know how to tell the difference between the 200X & 350X forks?
Power User
Lord of the trike
This might explain the tendency to wheelie !! lol...
Currently :
82 ATC - 200, plain jane, almost mint. ( Sold, 03-17-2005)
84 ATC - 200 ES, Jimmy-Rigged, don't ask.( Sold, 03-17-2005)
85 ATC - 250 SX, Pride and Joy, Bottom-Less Money Pit.
84 125 M - The Mini-SX
--
The more people i meet.. the more i like my DOG !
First Time Rider
Arm chair racerNew to the board
lol and my fender not fitting
but performance wise this is a good thing right?
thats not a cable its a breather tube that i dont kno where goes.
First Time Rider
Arm chair racerNew to the board
ok im kinda worried now. i have a 200x or 350x front end. and this high flow cobra muffler how am i supposed to kno wat other mods r on this trike? im scared im gona buy a part to replace somthing and itll be the wrong one cuz i have somthing different.
Post Count: Starting over
Arm chair racerRoostin Away
Just look at the part you bought, and the part you replaced. If they look the same, then you're ok. But if its a piston or something like that, that method wont work. lol
'85 250SX - My first ever trike and my pride and joy
**Check Out The Whole SX Project Here!!**
'85 350X - 10:1 Piston, performance cam, '86 engline/carb
'85 Powervalved Tri-Z - Fully modded - Soon to have a Corey Sprock 310 kit
'85 250R - Began the modification process. This bike is going to scream! -295cc kit, Ported, Drag intake, 40mil Keihin, VForce reeds, shaved head, PT High Rev pipe, Fat Boy 2 Silencer, +4 Durablue axle, +2 swinger-
First Time Rider
Arm chair racerNew to the board
hehe if it comes to the point that i need a piston i dont think ill have enuf money to pay for the parts and i doubt i could get my dad to pay for it. we'd prolly go to this near by atv scrap yard and find an engine. itd be cheaper and prolly a better result if we pick a bigger engine.
Post Count: Starting over
Arm chair racerRoostin Away
It will probably take some fabrication work to get it to fit in there right though.. depending on what kind of an engine you pick.
'85 250SX - My first ever trike and my pride and joy
**Check Out The Whole SX Project Here!!**
'85 350X - 10:1 Piston, performance cam, '86 engline/carb
'85 Powervalved Tri-Z - Fully modded - Soon to have a Corey Sprock 310 kit
'85 250R - Began the modification process. This bike is going to scream! -295cc kit, Ported, Drag intake, 40mil Keihin, VForce reeds, shaved head, PT High Rev pipe, Fat Boy 2 Silencer, +4 Durablue axle, +2 swinger-
First Time Rider
Arm chair racerNew to the board
lol fabrication. thats gota be my favorite word. also the most often used word in my garage.http://fordtruckworld.tenmagazines.c...-3-album-44448 thats the engine me n my dad rebuild last month.
heres another fine example of fabrication. http://fordtruckworld.tenmagazines.c...n-302074-pos-1
this truck was born a standard cab 2x4 with a 302 ford V8 now its 4 door 4x4 with a 7.3l diesel. my sisters truck
its a shame i dont have any pics of our tractors they have plenty of fabrications :twisted
in a few years wen i get a truck i plan on putting a navistar DT 570c.i.in it if i can afford one.
if we had an extra one my dad would put a little 302c.i. in my trike
Post Count: Starting over
Arm chair racerRoostin Away
The links wont work. But as long as you have the fabrication knowledge and experience, it'll be no prob..
'85 250SX - My first ever trike and my pride and joy
**Check Out The Whole SX Project Here!!**
'85 350X - 10:1 Piston, performance cam, '86 engline/carb
'85 Powervalved Tri-Z - Fully modded - Soon to have a Corey Sprock 310 kit
'85 250R - Began the modification process. This bike is going to scream! -295cc kit, Ported, Drag intake, 40mil Keihin, VForce reeds, shaved head, PT High Rev pipe, Fat Boy 2 Silencer, +4 Durablue axle, +2 swinger-
Power User
Got the holeshot
OK dude, looks like a 200x front end to me. Actually I know it is by looking at the bottom of the forks. I got a front fender you can have that will fit nicely. (White though)
'85 350X-The Flagship
Speedo, Chrome HL Guard, Rubber Steps
DG Chrome Power, 6-Pack Rack, White Bros Skidplate, 400ex Carb
'85 250ES Big Red-Working in Style
Many Hondaline & Aftermarket Add-ons
'84 250R-Old School Racer Project
Too many Accessories to List
'82 200E Big Red-The Tractor
Rubber Steps, Tripmeter
'85 250SX-Rider
Various Accessories
'13 CBR250R & '05 CBR600F4i-Road Toys
Yoshi Slip-Ons & Fender Eliminators
Power User
Got the holeshot
Holy crap I think I'm wrong... looks more like an 83-84 250r front end now that I look at it again. Or at least the forks do. lol I dunno, if it was light out I'd go look in the garage but it's not so... I'll report back in the morning if I remember (lol).
'85 350X-The Flagship
Speedo, Chrome HL Guard, Rubber Steps
DG Chrome Power, 6-Pack Rack, White Bros Skidplate, 400ex Carb
'85 250ES Big Red-Working in Style
Many Hondaline & Aftermarket Add-ons
'84 250R-Old School Racer Project
Too many Accessories to List
'82 200E Big Red-The Tractor
Rubber Steps, Tripmeter
'85 250SX-Rider
Various Accessories
'13 CBR250R & '05 CBR600F4i-Road Toys
Yoshi Slip-Ons & Fender Eliminators
First Time Rider
Arm chair racerNew to the board
really? wat will it cost me? color dont matter wen i get a new tank ill just get a white one so it looks like its supposed to be that way
First Time Rider
Arm chair racerNew to the board
would better pics help? if i get some batteries tomrow i can get better pics just tell me wat ya need to get a good look at.
Power User
Got the holeshot
Sending a PM as I post this message.......... It don't matter if it is 200x or 250r front end the fender will work on both.
I don't really need better pics just need to go see my own trikes to compare...
'85 350X-The Flagship
Speedo, Chrome HL Guard, Rubber Steps
DG Chrome Power, 6-Pack Rack, White Bros Skidplate, 400ex Carb
'85 250ES Big Red-Working in Style
Many Hondaline & Aftermarket Add-ons
'84 250R-Old School Racer Project
Too many Accessories to List
'82 200E Big Red-The Tractor
Rubber Steps, Tripmeter
'85 250SX-Rider
Various Accessories
'13 CBR250R & '05 CBR600F4i-Road Toys
Yoshi Slip-Ons & Fender Eliminators
Reply With Quote
