Well thats the weird thing. The one bulb I have, it works fine in high beam, but doesn't work in low beam since the low beam filiment is broken. But the other one just glows in high and low beam..
Post Count: Starting over
Arm chair racerRoostin Away
Well thats the weird thing. The one bulb I have, it works fine in high beam, but doesn't work in low beam since the low beam filiment is broken. But the other one just glows in high and low beam..
'85 250SX - My first ever trike and my pride and joy
**Check Out The Whole SX Project Here!!**
'85 350X - 10:1 Piston, performance cam, '86 engline/carb
'85 Powervalved Tri-Z - Fully modded - Soon to have a Corey Sprock 310 kit
'85 250R - Began the modification process. This bike is going to scream! -295cc kit, Ported, Drag intake, 40mil Keihin, VForce reeds, shaved head, PT High Rev pipe, Fat Boy 2 Silencer, +4 Durablue axle, +2 swinger-
Got The Holeshot
Arm chair racerJust too addicted
Might be a bad bulb too. Have you tried the bulb with the battery in your car?? Put the metal part against one terminal, and use a wire to connect one of the posts on the bottom to the other battery terminal. Try both posts and make sure the bulb is good.
ATCnut
82 185s - sold
83 200x (hopped up)
84 200x (stock)
84 70 (lost this one to the DMV)
85 70 (soon to have lights, a foot brake, and CDI ignition)
84 200es (parts trike) - sold
85 350X (the best)
85 350X (siezed motor, dream of a poweroll kit someday)
85 250sx (frame was trash, got parted out)
86 250sx (the tractor)
86 250sx (a nicer tractor)
86 250sx (an even nicer tractor)
87 200x (parts trike, its really rough, a dog was chewing on it for a while)
87 250es Big Red (the tank!!)
Reply With Quote