Atc Speedo Delivered todaY!

[Maine_Triker]

Here's what I was talking about to do with the second clamp. Just put it on the fork boot so it don't damage the forks.... looks cool IMO.

[1DEADPRESIDENT]

Gotcha!! I am cleaning up the speedo and the Br mount it camewith. I also received the speedo gearbox. VERY NICE!!! Do you remember where you got your speedo cable???? I need to get two of them.

[Maine_Triker]

Gotcha!! I am cleaning up the speedo and the Br mount it camewith. I also received the speedo gearbox. VERY NICE!!! Do you remember where you got your speedo cable???? I need to get two of them.

I got my cable NOS from a local dealer... but like I siad you can go to your dealer and just ask them if they have any HONDA cable that is the right lenth. The one on my 350x is 34". Just make sure that the bottom of the cable you buy is "correct", some of them screw in just like on top by the speedo.

Here are some 250es install instructions I just scanned. The 350x is different but it gives you a basic idea.

[Maine_Triker]

While I'm at it I'll post the 200x install instructions too. As you can see the 200x kit has a "Fender Holder"... it's not really nessesary but you should probably use a zip tie to tie the cable to the fork in the place of the fender holder.

Lenths of my stock 200x cables are about 29" if my memory serves me right...

Phil

[350x'inNY]

DEAD.... let me know if you need me to repost the 350X instructions.... I also have the 81-82R instructions and the 85-86R instructions scanned.

Mods, Billy, Howdy, etc..... Do you think we could have an area on the homepage for Hondaline/ Yamaha Assessory mounting instructions???? I could send one of you my Hondaline folder or scan them in myself and send a CD yourway..... I have about every Hondaline instructions for each Hondaline thing I got.....

Bruce

[1DEADPRESIDENT]

Thanks professor. I probably will need those scans. I am trying to get the other bits and pieces together first. I will let you know. I agree that the scans would be helpful to all. I have Hondaline instructions for the overfender stabilizers, but they are easier than the speedos.

[Maine_Triker]

Mods, Billy, Howdy, etc..... Do you think we could have an area on the homepage for Hondaline/ Yamaha Assessory mounting instructions???? I could send one of you my Hondaline folder or scan them in myself and send a CD yourway..... I have about every Hondaline instructions for each Hondaline thing I got....

That is a great idea! Lets see... I got instuctions for the 200es, 250es, and 200x speedos; HL lense grille instructions for 83-84 R and 250es; 350x rear over fenders and HL guard; and rubber footpeg covers for the 200e/200es.

Would we also need the french instuctions?

Phil

[350x'inNY]

That is a great idea! Lets see... I got instuctions for the 200es, 250es, and 200x speedos; HL lense grille instructions for 83-84 R and 250es; 350x rear over fenders and HL guard; and rubber footpeg covers for the 200e/200es.

Would we also need the french instuctions?

Phil

Non... Je parle francais tres en peu. Zut Alors!

[Maine_Triker]

Non... Je parle francais tres en peu. Zut Alors!

Je ne parle pas le beaucoup de français ou... mais ce pourrait être plus facile pour nos amis de Canadien français si nous avions instuctions français aussi!

Phil

[350x'inNY]

Je ne parle pas le beaucoup de français ou... mais ce pourrait être plus facile pour nos amis de Canadien français si nous avions instuctions français aussi!

Phil

Oui...Oui... C'est vrai! Je comprende.

[jamesbigred250]

i have a 87 honda bigred 250es and was wondering were i could get a speedo

[edog]

Try Maine Triker or 350XinNY they are hordding them all.

[Billy Golightly]

Yeah we could probably do something like that on the site. Best thing is to probably mail me a CD. THen I can take it to my moms office and upload everything there on broadband instead of out here on dialup.

[Maine_Triker]

Yeah we could probably do something like that on the site. Best thing is to probably mail me a CD. THen I can take it to my moms office and upload everything there on broadband instead of out here on dialup.

PM me your address Billy, I'll burn what I have on a CD-R and sent it to you.

Here's what I got:

83-85 200x speedo instructions
200es speedo instructions
82-84 Big Red "Rubber Steps" instructions
250es HL Lens Grille instructions
83-84 250r HL lens grille instructions
350x HL guard w/built in grille instructions
350x rear over fender instructions


I don't think I have the software to transfer the scans to .pdf format, so I'll scan them and send in .jpg form.

Phil

[Maine_Triker]

Try Maine Triker or 350XinNY they are hordding them all.

What are you talking about.... "hordding", I just sold one of mine to a buddy.... and I need the rest of the stock!