83 R pre mix oil questions??? can I use Bel-Ray H1R??

[trikezilla]

Hi all,

I bought some Bel-Ray Oil for my 1983 250R. It is the H1R stuff..the "Synthetic 2 stroke racing oil". I was wondering:

Can I use this on my air fooleR?? (I shoulda thought of that before I bought it!!) I ask because it says its a "power valve formula" IDK 100% for sure what that means, and I dont know if my 83 has that or not.

Also, if you run this, what do you pre mix @?? I am thinking about 40:1..if thats a bit rich Ill go 50:1.

Thanks in advance

[G-MAN-1]

i dont think it will bother anything. its great oil and at 40:1 it should be good.
i use this oil in a liq cooled bike but i dont see why an air fooler should be diff.
go for it...............

[trikezilla]

Thats what I was thinking. I read the label(s) and it DOES NOT mention or specify for water cooled or air cooled machines. Any body else have any ideas??

[trikezilla]

Oh yeah...I cant seem to get this right no matter what I think of:

If I mix @ 40:1...how many ounces total do I need to dump in with 2 gallons of gas?

What kind of gas should I burn also...in a two stroke with a bit of motor work and reeds and exhaust system can I get by with just regular or should I try going up a grade??

[atc86r]

I use no smoke 2 stroke from tractor supply in my air cooler.

[TimSr]

I ran H1R at 50:1. Its good oil suitable for any 2 stroke.

[OldSchoolin86]

Oh yeah...I cant seem to get this right no matter what I think of:

If I mix @ 40:1...how many ounces total do I need to dump in with 2 gallons of gas?

What kind of gas should I burn also...in a two stroke with a bit of motor work and reeds and exhaust system can I get by with just regular or should I try going up a grade??

128oz in a gallon. 40:1 is 40oz of fuel to 1oz of oil. So in one gallon you divide 128 by 40 and get 3.2. Double that for 2 gallons. So you need 6.4oz of oil.