Results 1 to 7 of 7

Thread: ?? about pulling 83 250r motor

  1. 02-15-2003, 08:32 PM #1
    wanting200x250r
    wanting200x250r is offline First Time Rider Arm chair racerNew to the board
    Join Date
    Jan 2003
    --
    146

    ?? about pulling 83 250r motor

    can you pull the motor without taking off the swingarm??
    Reply With Quote Reply With Quote
  2. 02-15-2003, 10:37 PM #2
    Mobular's Avatar
    Mobular
    Mobular is offline Got The Holeshot Arm chair racerJust too addicted
    Join Date
    Nov 2001
    Location
    B.C.
    --
    933
    Yes. The swinger isn't attached to the engine at all. All that has to be removed/disconnected is the fuel tank, intake, electrical, chain, and exhaust.
    Join The Trike Registry Now!
    http://fly.to/TrikeHeaven

    Don't be cheap! Go buy a manual!
    Reply With Quote Reply With Quote
  3. 02-15-2003, 10:38 PM #3
    PLJ.
    PLJ. is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Feb 2003
    --
    253

    83 R.

    There might be someone who can do it, but I could not figure it out. With the top end still on it, I had to remove the swingarm and the linkage to get the motor out. The Clymer book doesnt tell much about removing the 83, just the older ones. After disassembling mine, I think that the 83 is quite a different animal compared to the rest of R's. Gook luck.
    Reply With Quote Reply With Quote
  4. 02-15-2003, 10:39 PM #4
    Mobular's Avatar
    Mobular
    Mobular is offline Got The Holeshot Arm chair racerJust too addicted
    Join Date
    Nov 2001
    Location
    B.C.
    --
    933
    ...and clutch cable.
    Join The Trike Registry Now!
    http://fly.to/TrikeHeaven

    Don't be cheap! Go buy a manual!
    Reply With Quote Reply With Quote
  5. 02-15-2003, 11:30 PM #5
    Lots_Of_Nothing's Avatar
    Lots_Of_Nothing
    Lots_Of_Nothing is offline So bombed at TF I needed both hands to hold my beer Teaching quads a lesson
    Join Date
    Oct 2002
    Location
    Upstate NY
    --
    2,665
    LMAO , what are you people thinking?, YES you have to take the swingarm off, the shock brace is one of the motor mounts, LMAO, and the swingarm bolt holds down the back of the engine, you tell you me a way that you can take the engine out without taking the swingarm off, cuz i would really like to hear it
    Give me no lip and I tell you no lie.

    -TF 05' , And cant wait till 06!

    Reply With Quote Reply With Quote
  6. 02-15-2003, 11:45 PM #6
    PLJ.
    PLJ. is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Feb 2003
    --
    253

    83

    I would like to know how also. As I said before, it was impossible to do in my frame and it says 83 right on the frame. Thanks.
    Reply With Quote Reply With Quote
  7. 02-17-2003, 09:04 PM #7
    250r83's Avatar
    250r83
    250r83 is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Oct 2002
    Location
    New Hampshire
    --
    210

    Only with the top end off

    My brother did mine when I had the jug off to have it bored. It can be done.
    400ex, looking for a 1984 250r(running or roller) or a 200x.
    Reply With Quote Reply With Quote
//ArrowChat Integreation Code //