crf50 pipe on 125M!

**New2ATC** · 10-03-2005, 05:51 PM

Well I have a 125 M and the exhaust was pretty clogged, and I had a spare White Brothers R4 for a CRF 50 laying around, so I tried to see if it would bolt up. Sure enough it did. It is leak proof at the head and sounds like a 400ex with a FMF pipe on it. I dont know if there is a power gain as of yet as I need a new pecock for a longer ride, but It does sound sick. Ill get pics up soon of the install. Also Anyone have a non gunked up petcock for a 1985 125m? Its they type that bolts onto the carb. not the gas tank. Let me know.

**hondatrikesrule22** · 10-03-2005, 06:17 PM

Yea, someone else said they would work on the 125ms. This opens up a whole new world for exhaust possibilies for the ATC 90/110/125m.

No more searching ebay for an old supertrapp.

**85hondaatc125m** · 10-03-2005, 06:17 PM

i have a 85 125m too and i have a problem with my pecock too, my is rivetted on though so is it possible to get it off without getting a whole new carb?

**New2ATC** · 10-03-2005, 06:24 PM

yeah it should have 2 screws holding it obn. one on the top left and one on the bottom right. Mine is clogged so it doesnt stream out, its more like a slow drip.

**trikezilla** · 10-03-2005, 06:46 PM

Any pics of your R4?? I have a FMF cr125 Shorty pipe on my M. I bet yours looks more trick though.

**New2ATC** · 10-03-2005, 10:11 PM

I will get pics tomarrow in the daylight. It is somewhat short on the M but sounds trick and looks pretty sick too. if i get ahold of a welder im gonna extend the head tube on it or put the silencer on the stock headpipe.

**New2ATC** · 10-04-2005, 04:02 PM

Well i got the trike running pretty good. I took the petcock completely off and blew some carb choke and throttle body cleaner in the fuel inlets. the reserve was caked in dirt so no flow there, and the on was a little clogged. I cleaned them both up, put the petcock back on gave it a pull and vroom... she cama alive. Im going to go get pics now..so youll see the beast.

**New2ATC** · 10-04-2005, 04:09 PM

Heres the pics..

**New2ATC** · 10-04-2005, 04:12 PM

also anyone else use these tires? I dont know the name but they seem to be good for traction.

**Tri-ZNate** · 10-04-2005, 04:37 PM

they are carlisle trail pros I have them on my SX. Seems to slide very well when they get wore down

**trikezilla** · 10-04-2005, 06:57 PM

That pipe looks pretty cool. I need new tires...so you say they are working well for you?? How hard of compund are they...I need some harder ones because of the gravel I ride on mostly.

**New2ATC** · 10-05-2005, 12:33 AM

Yes these tires work well for me. I dont know anything about them, as they were on the trike when I bought it. I will give them a real mudding test friday when we go riding for the weekend. These trikes are a blast to wheelie with too. All I need now I think is headtube bearings because it has a little wobble and i cant tighten it much more. Trikezilla, I might be shootin for the same goal as you with your 125M. A flat tracker. I am not sure yet but it is still on my mind..

Thread: crf50 pipe on 125M!

Thread Tools

crf50 pipe on 125M!