Rebuilt the X and threw it together.

[Lots_Of_Nothing]

Finally got all the motor parts I needed, So i got it together. 10.25:1 wiseco .20 piston, all new gaskets and seals in the top end. (and some in the bottom). Honed and polished carb, port and polish job on the head, dual rate springs, few other little things, heres a couple pics of the motor going together.








Then I got my frame back from being fixed, so i threw the rest of it together. I was cleaning everything as i was putting it together, but after like two parts I said screw it, Plan on gover over everything with a rag and some polish after its together. Still waiting on my seat cover and my black fork boots. I sold my OEM seat (decided to sell it before i screwed it up), made about 170, bought a used seat needing a cover for .99 cents, and a new black gripper cover w/ flames for $35. Not bad in my oppinion . Started it up today, second kick and it came to life, idles great, runs great, no smoke at all, no weird noises. I then proceded to beat the hell out of it, Man what a difference, it has so much more power now. Gonna have to do a compression test tomorrow, the thing breaks my leg so im guessing a good bit. In the pics there is no rear fenders or seat because it started sprinkling out, and i dont have my seat cover yet, and i didnt want the foam soaking up the moisture.

Heres the pics, If you have a question, make sure you read what I typed up there ^^ first to avoid making an ass out of yourself.

Enjoy. And for everyone that was at haspin.. Yes, thats still remains of the haspin concrete scattered about.

This pic was before I installed the chain and skid..






I have a short vid of it running, but the program i use to convert .mov to .avi (divx) has decided to not work worth a crap today.

[edog]

Looking good.

[cragster]

i like it
what year is that? 86?

[cragster]

i just relized it has red plastics lol
85?

[NOS_350X]

Are you doing any other mods to it besides the high comp piston?

[Lots_Of_Nothing]

Are you doing any other mods to it besides the high comp piston?

Heres the pics, If you have a question, make sure you read what I typed up there ^^ first to avoid making an ass out of yourself.

Finally got all the motor parts I needed, So i got it together. 10.25:1 wiseco .20 piston, all new gaskets and seals in the top end. (and some in the bottom). Honed and polished carb, port and polish job on the head, dual rate springs, few other little things, heres a couple pics of the motor going together.

Cragster, its an 85.

[cragster]

ok i figured it was
im getting an 86 model with weisco piston
will they hold up for me? or is it like other aftermarket stuff and not be half as well as orignal

[Lots_Of_Nothing]

Cleaned it up a little bit more, put a few more things on, got everything working and tightened down. Still waiting on my seat cover, that is why there is no seat.

[okieRrider]

Looks great Jared!!!!!.....Chris

[threewheelin-feelin]

that looks like the same piston i have in my nonrunning 350x....other then its stock bore

[Blown 331]

Awesome, I need to get one soon. I like the 85's more. It seems like I'm the only one on this board that thinks this but I really don't like white plastic.