Twinkle Toes
The day begins with 3WW
so the 200x steering stem is shorter than the 110 so you lengthened it by grinding and tapping the bolt into the steering stem and welded it. IS that right so far?
I'll have to drop my front end off and see how big of a job it is. I have almost a complete 200x front end (just need the bottom tripple clamps) that I could use to do it.
Nate
The Myth, The MAN, The Legend
R.I.P HRR
Originally Posted by honda250sx
At The Back Of The Pack
Arm chair racerAt the back of the pack
Thats about it, If I were you by a set of 110 forks off of ebay, you can probaly get a set really dirt cheap, that way you don't screw up your forks incase you want to go back, I used a old set that were bent and going to the trash anyway just to see if it could be done,
Twinkle Toes
The day begins with 3WW
ok so you put the 110 stem onto the 200x tripples?
Nate
The Myth, The MAN, The Legend
R.I.P HRR
At The Back Of The Pack
Arm chair racerAt the back of the pack
Yes, you will have to cut them out. The 110 stem is welded to trees originally, cut it out grind down excess so it looks nice
New to the board
Arm chair racerNew to the board
Dude, that looks really good. Can't wait till its done. If it looks anything like the pics in 250sxwheeliepop's signature, I am soooo doing that. Good work!
Power User
Lord of the trike
You better be up for a lot of work then because those are pictures of his 250SX.
1984 Yamaha YT 60 Tri Zinger(current project)
1983 Yamaha YTM 200 (rear suspension kit)..... long term project
2004 BMW R1150R
1972 Honda CT 70
2007 Lifan 110
Twinkle Toes
The day begins with 3WW
Anyone know the length of the 110 stem? I'd just like to modify the 200x frontend I have to fit the 110 without rewelding a stem on there.
Nate
The Myth, The MAN, The Legend
R.I.P HRR
New to the board
Arm chair racerNew to the board
Just curious, what would you charge to do it for me?I don't mind doing it for myself, but I have a few things that need to be done first...
Twinkle Toes
The day begins with 3WW
are you talking to me?
Nate
The Myth, The MAN, The Legend
R.I.P HRR
New to the board
Arm chair racerNew to the board
Yes, you or danteross77...
New to the board
Arm chair racerNew to the board
Yes, you or danteross77...
Twinkle Toes
The day begins with 3WW
Well If you want When I make up the tripple tree setup for the 200x front end I could just send you the tree, you send me a stock one and you would be set. Or do you need the whole front end?
Nate
The Myth, The MAN, The Legend
R.I.P HRR
New to the board
Arm chair racerNew to the board
Can you do that?
Reply With Quote