In Pismo years ago my brother broke the kicker off my 86. We ended up using a Banshee kicker since that was all that was available. It worked well but was shorter than stock.
New to the board
Arm chair racerNew to the board
In Pismo years ago my brother broke the kicker off my 86. We ended up using a Banshee kicker since that was all that was available. It worked well but was shorter than stock.
Banshee Killer
Power User
The day begins with 3WW
Yah but its not the lever that broke. #13061 sheared off at the base of the knob.
My Feedback 85 TECATE 500 08 Honda 450R
Just Too Addicted
Arm chair racerJust too addicted
Hmmm, that could be tough, did you try welding a new peice of metall on it? Or does it have a special taper to it? If you can weld on a new peice run your mig welder all the way up, burn right into it! If not, do the same with the old one, just take your time.
Power User
The day begins with 3WW
I put a big bevel in the bottom of it, ran the mig on the highest temp and welded it solid. Holding up thus far.
My Feedback 85 TECATE 500 08 Honda 450R
HELLO, my name is stickers!
Catch me if you can
Has the kickstarter blues...
If you can wait till you get the replacement you'd be better off. don't wanna mess up those splines.
A little off topic here but I'm curious about that front tire your running there. I think it looks good but how does it make the trike handle. I would think its alot heavier than stock so that must help a little.
Btw, this was the kicker on my 200x.
Last edited by chris200x; 12-31-2007 at 12:34 AM.
Power User
The day begins with 3WW
It handles good. Lots of traction, don't push in the turns.
Kicker is fixed, seems to be holding up better then any other time before.
My Feedback 85 TECATE 500 08 Honda 450R
Got The Holeshot
Arm chair racerJust too addicted
if it breaks again, i would have someone tig weld it. a tig has a stronger weld plus it will penatrate deeper
Billet Triz 250 parts, Case Savers, Engine Mounts, Boost Bottles, Oil Caps, and Shifters, pm me for info
Shock Rebuilding, PM me for details TRI-Z Shocks rebuilt too
My Feedback
http://www.3wheelerworld.com/showthr...k-for-sblt500r
Power User
The day begins with 3WW
sblt500r, I don't know anyone here with a tig. I really wish I did though cause that would be the best way to fix it.
My Feedback 85 TECATE 500 08 Honda 450R
Reply With Quote
