Well some of you may know that my Z was refusing to start. i had cut the engine one day and the next nada nothing zip except backfires. Well i was jumping around trying everything, CDI, carb, exhaust, and then today i thought well im not getting anywhere so i started to tear into it with the intention of taking the topend off.
When taking it apart i though ahhh i can get the compression tester in now and i then went to kick it over. 160PSI fine but whats that clicking? i look down and there was sparks jumping from the body of the coil to the frame.
I pull the coil off and take a look and on both side there are large cracks.I had been chasing the wrong thing for a week and a half! it wasnt the CDI but the coil
The moral? if your getting backfires or no start..... check your coil for crack and damage!!
Ohhh and if your wondering wheres my plug lead? i pulled it out to test the other day if that was my problem.
Staceyl200 and 03orangeshee you were right on the money when you suggested it!![]()