whats the bigist cc *Edited* can put on an 85 tecate?????????
Registered User
New to the board
whats the bigist cc *Edited* can put on an 85 tecate?????????
Just Too Addicted
Arm chair racerJust too addicted
330cc to the best of my knowledge. tecate connection should be able to help you out.
1985 KXT 250
84 KX cylinder
sprock racing head
+2" Miltech swingarm
frame mounted Rad
1983 250R
DG head
290cc Big Bore
CT pipe
85R front end
+1" Miltech swingarm
2+2 axle NOS NASA
18x10x9 Hoosiers
Power User
4 Wheels? Huh?
Digging up old threads but does anyone know who was doing these 330 engines? It seems I need a piston and I have no idea what piston was used.
Power User
Roostin Away
I got a 300cc Kit from Corey Sprock, billet cool head and intake too. 76mm stock bore.
Power User
4 Wheels? Huh?
Yeah I had one too. This is a stock head with an 80 mm bore with an iron sleeve. It had to of have a cylinder spacer too. But I will have to have one made when I figure out what piston I need.
At The Back Of The Pack
Arm chair racerAt the back of the pack
I have a 300 and a 330. The 330 piston is from a jet ski. I have a brand new one in the box if you want part#s.
3 86 Tecate 3
1 87 tecate 3 (with kx 540 motor)
1 87 tecate 4 (with 330 motor, 250r geometry)
1 83 atc 70
1 Kfx 50
1 kfx 400 ( with 470 parting out bike)
1 78 KZ 1000 ( with 1340 turbo)
1 Aprilia SXV 550 Supermoto
1 01 ZRX 1200 prostreet (sold)
Power User
4 Wheels? Huh?
That may help. Is your 330 a t4 engine? If so that's the same 76 mm piston as the 300 for the t3.
At The Back Of The Pack
Arm chair racerAt the back of the pack
Greg at Off Road Innovation would be able to answer that question. I believe he has built a few.
Power User
4 Wheels? Huh?
Sprock does ori's big bores
At The Back Of The Pack
Arm chair racerAt the back of the pack
My 330 is for my T4 and the 300 for my T3. They are different sizes. I don't have a spare 300 to take pics of. Here's the 330.
3 86 Tecate 3
1 87 tecate 3 (with kx 540 motor)
1 87 tecate 4 (with 330 motor, 250r geometry)
1 83 atc 70
1 Kfx 50
1 kfx 400 ( with 470 parting out bike)
1 78 KZ 1000 ( with 1340 turbo)
1 Aprilia SXV 550 Supermoto
1 01 ZRX 1200 prostreet (sold)
At The Back Of The Pack
Arm chair racerAt the back of the pack
Can you post a pic of the intake. I need one.Originally Posted by 3 Wheel Drive
3 86 Tecate 3
1 87 tecate 3 (with kx 540 motor)
1 87 tecate 4 (with 330 motor, 250r geometry)
1 83 atc 70
1 Kfx 50
1 kfx 400 ( with 470 parting out bike)
1 78 KZ 1000 ( with 1340 turbo)
1 Aprilia SXV 550 Supermoto
1 01 ZRX 1200 prostreet (sold)
Power User
4 Wheels? Huh?
I texted with Corey earlier and he said he did a few 330 t3's using a Polaris piston. After looking at those it was clear that's not what I have. After exploring a hunch some more I am on the hunt for a wiseco 231 p3 or p4. It turns out it is a Yamaha dt360 piston. I got the topend cheap assuming I would never find a piston for it and I may not still but I am a step closer. The last topend I had to find a piston for took 2 weeks(probably 20-25 hrs) of looking at hundreds of pistons. I nailed this one down in about 24 hrs so I'm happy about that. Thanks for trying to help rob, I do appreciate it. Now to figure out who was doing these back in the day. My guess would be klemm but there is no markings at all. I will have to get ahold of him and pick his brain I guess.
Power User
Roostin Away
Oile has a Klemm BB T3, send him a PM. I don't remember what size it was but it is larger than mine for sure.
Just Too Addicted
Arm chair racerJust too addicted
Let me get some pics up. It's a 327 made by Harry Klemm
Just Too Addicted
Arm chair racerJust too addicted
Reply With Quote