big bore on tecate????

[3 Wheel Drive]

Can you post a pic of the intake. I need one.

The Sprock Racing Billet intake works good if you are using an open filter w/OutWear, if you are using the stock airbox the billet intake is much thicker than the stock intake boot.

If you are wanting to run the stock airbox, jesweinhart makes nice OEM reproductions.

Oh yea, this info is only for the 1st gen T3, I don't have a 2nd gen.

[oile]

Here are some more pics of the 327 cylinder

[oile]

Does this look like yours just ben?

[oile]

Here's a sprock intake, pwk38 carb and a stock air box

[just ben]

That looks like the beast I'm dealing with. My piston is slightly different, instead of having windows on the intake side it' cut out like the side but goes up higher. I was able to confirm the piston I have is a 231p2. There is on on eBay but I have to go to the next bore which probably will be it's last since it's not a very thick sleeve to begin with. Do you have the spacer plate? If so can you get a measurement of the thickness ? Also is there head mods done on yours? The head that came with mine looks to be untouched.

[tecaterob]

Here's a sprock intake, pwk38 carb and a stock air box

Does sprock still make intakes?

[3 Wheel Drive]

You should contact: http://off-roadinnovation.com/kawasa...e_3_parts.html

They sell the cool heads and other tecate stuff. I have not seen Corey post much lately, his username on here is TriTecate350x.

[6speedthumper]

CWR still lists a 330 kit, and a 295 kit. I don't know if the 300 kits you are talking about are true 300cc or if they are rounded to that, but, you may want to contact Greg and see if his pistons are what you need.

[oile]

Here's a few parts for that 327 cylinder spacer,head gasket and the head. The head on the right is a stock head

[oile]

port work on intake side

[tecaterob]

Oile very nice motor you got there !!

[just ben]

thanks for the pics , that is indeed what I have. Are you positive it was made by klemm? beside a piston I am going to need a spacer and a head gasket. I will have to get ahold of Harry this week.

[just ben]

I talked to harry klemm yesterday, he wasn't able to give me much info since these were done 20+ years ago. Can you measure the thickness of the spacer for me Oile? I think that is all I am going to need to get this beast in running order again. I am going to have some base and head gaskets made too, if you need any for your topend.

[Tecate250]

So any news on the pistons? Ive heard so many times about these jet ski pistons and such. Both my cyl are on last bore and if re sleeveing is required this may be an option. There is little to no info on big bore Tecates.

[just ben]

So any news on the pistons? Ive heard so many times about these jet ski pistons and such. Both my cyl are on last bore and if re sleeveing is required this may be an option. There is little to no info on big bore Tecates.

I believe the kits available now all use a modified watercraft piston. The piston I was looking for was sourced from a vintage Yamaha dirt bike.