I saw that als250 had put 200x forks on his SX but I was wondering if it was possible without useing 200x triple clamps. Tell me what ya know!
Thanks
At The Back Of The Pack
Arm chair racerAt the back of the pack
I saw that als250 had put 200x forks on his SX but I was wondering if it was possible without useing 200x triple clamps. Tell me what ya know!
Thanks
At The Back Of The Pack
Arm chair racerAt the back of the pack
T-200x, I don't know about fork dia., but problem I see is that there is no flanges?? on 200x left fork that (250sx) frt. brake panel slides into to hold it from turning. Look on your sx and you'll see what I mean. I think you have to change everything from triples on down.
Al
TF03/HASPIN ACRES /BADLANDS SURVIVOR!!! -LIFE IS GOOD!!
'86 350x (latest addition)
'85 250sx-200x frt.end,350x bars,plastic tank,3"hub spacers,22x11x10 Fast-Trekkers/.190 Douglas Red Label alum. rims/PRM desert grab bar
'85 250sx(supertrap exhaust,chrome rims)
'87 200x(restored)-'85 200x-'84 200x
Putting Priorities in Order, Busier than ever.
Catch me if you can
There is only 2 ways I know of to use 200x forks on a 250sx.Originally Posted by toyota200x
1st ( and easiest ) is to use the 200x triple tree.
2nd is to make a custom triple tree for the forks.
Either way using 200x forks you need to either jury rig a brake set up, or swap the complete front end off of a 200x.
Howdy
Reply With Quote