Post Count: Starting over
Arm chair racerRoostin Away
http://www.rockymountainatv.com/type...6&navType=type
Maybe this will work.
I was looking at the 2 gold chains on the bottom of the screen.. one is a "racing chain" and one is an "o-ring chain".
Which do you figure would be better for the money?
One of those two, or the one off eBay?
'85 250SX - My first ever trike and my pride and joy
**Check Out The Whole SX Project Here!!**
'85 350X - 10:1 Piston, performance cam, '86 engline/carb
'85 Powervalved Tri-Z - Fully modded - Soon to have a Corey Sprock 310 kit
'85 250R - Began the modification process. This bike is going to scream! -295cc kit, Ported, Drag intake, 40mil Keihin, VForce reeds, shaved head, PT High Rev pipe, Fat Boy 2 Silencer, +4 Durablue axle, +2 swinger-
Just Too Addicted
Arm chair racerJust too addicted
http://www.3wheelerworldforums.com/s...ead.php?t=4303 Pm this guy, he had a ton of powdercoat work done and it only cost him 50 bucks mabye you can get his guys number, etc and ship to him??
I would got for this 1-youre on a budget and it is very cheap, you dont need a racing chain for your 350x presently do you, it saves you alittle coin for powdercoating as well http://www.rockymountainatv.com/productDetail.do
http://www.pilotodyssey.com/PO/index.php
88 TRX LRD,39MM pwk,Durablue+4.Nice rider
85 250r West Coast +4,Durablue +4,Boyesen rad valve,Keihin 39mm,Rad double row carrier
86 250R west coast +4,Durablue+4,Maier plasitcs, Keihin, Boyesen,Wiseco big bore kit
85 350x-all new everthing,trailer queen,all OEM-NOT FOR SALE!!
4-FL400R HONDA PILOTS.See my section on the page!
2-85 T-3 Tecates all the bells and whistles
85 T-3 project trike in works
Post Count: Starting over
Arm chair racerRoostin Away
I wonder why it only cost $50???
And what chain do you think you would choose for the price?
Did you get any pics of that plastic, axle, and shrouds yet?
Ben
'85 250SX - My first ever trike and my pride and joy
**Check Out The Whole SX Project Here!!**
'85 350X - 10:1 Piston, performance cam, '86 engline/carb
'85 Powervalved Tri-Z - Fully modded - Soon to have a Corey Sprock 310 kit
'85 250R - Began the modification process. This bike is going to scream! -295cc kit, Ported, Drag intake, 40mil Keihin, VForce reeds, shaved head, PT High Rev pipe, Fat Boy 2 Silencer, +4 Durablue axle, +2 swinger-
Post Count: Starting over
Arm chair racerRoostin Away
Anyone got any chain advice? lol
'85 250SX - My first ever trike and my pride and joy
**Check Out The Whole SX Project Here!!**
'85 350X - 10:1 Piston, performance cam, '86 engline/carb
'85 Powervalved Tri-Z - Fully modded - Soon to have a Corey Sprock 310 kit
'85 250R - Began the modification process. This bike is going to scream! -295cc kit, Ported, Drag intake, 40mil Keihin, VForce reeds, shaved head, PT High Rev pipe, Fat Boy 2 Silencer, +4 Durablue axle, +2 swinger-
At The Back Of The Pack
Arm chair racerFirst time rider
this is what I have on the lakota bought it 2 yrs ago and still running it.
http://rockymountainatv.com/productD...3&navType=type
85 ATC350X- weisco 10.25:1, uni, +3 swingarm, 3in. wheelspacers, RAD carrier, 450r muffler
85 Big Red
83 KLT200
82 ATC200
If it aint broke fix it anyway because it soon will be
Power User
Roostin Away
stay away from the non o-ring chain you'll be adjusting it every time you ride. for $65 you can get a good o-ring one.
my one bubby does powder coating he would do the frame for around $150
JASON LISKEY
1985 atc 250r ---- finsh line axle,.fmf exhaust and rictor privateer silencer, prm grab bar.
2008 KTM 525xc quad ----- HMF exhaust, HRE chromoly stem,
86 trx 250r --- with after market chromoly frame and everything else done to it
01 400ex --- with 86 trx 250r motor
87 250x + 93 300ex both 350x powered
2 = 86 atc 350x's
86 atc 250r
83 atc 185s --- from retired guy not ridden since 87
Bandito framed 110 with 85 motor and yellow us90 fenders + tank
Power User
Roostin Away
stay away from the non o-ring chain you'll be adjusting it every time you ride. for $65 you can get a good o-ring one.
my one bubby does powder coating he would do the frame for around $150
JASON LISKEY
1985 atc 250r ---- finsh line axle,.fmf exhaust and rictor privateer silencer, prm grab bar.
2008 KTM 525xc quad ----- HMF exhaust, HRE chromoly stem,
86 trx 250r --- with after market chromoly frame and everything else done to it
01 400ex --- with 86 trx 250r motor
87 250x + 93 300ex both 350x powered
2 = 86 atc 350x's
86 atc 250r
83 atc 185s --- from retired guy not ridden since 87
Bandito framed 110 with 85 motor and yellow us90 fenders + tank
Power User
The day begins with 3WW
That's probably going to be the best deal on a high quality chain you're going to find.Originally Posted by smokey
Reply With Quote
