Former 2strokefreak
Arm chair racerAt the back of the pack
ok hers the deal i need a TRI-Z pipe... badly... i've got a ported YZ250 powered tri-z.... it;s got a +8 arm on it... shearer makes and out of frame pipe... but i want a pipe thats "inframe" any ideas???? i can;t do the total custom pipe thing.... im in IN
Power User
Got the holeshot
try ftz, i know they have the outframe, maybe they make an inframe as well
1985 With "86" Plastic's,Custom 12" Alluminum Extended Swing Arm,39MM PWK,"TRX" Filter,9 Paddle TALLER HALLER'S on 11" Wide Rim's,LOT'S of Stainless,LOT'S of Alluminum,LOT'S of PowderCoating,NOTHING Stock..
FASTEST Tri-Z on The Planet...MAKE A NOTE !! and the SECOND FASTEST, WRITE IT DOWN AGAIN!!!
At The Back Of The Pack
Arm chair racerAt the back of the pack
buy a yz pipe and mod it to fit or pay someone to cut and reweld it to fit. if your running the yz topend, makes sense to runa yz pipe.
1985 Yamaha Tri Z 260PV
Suzuki Trail Buddy 50
Former 2strokefreak
Arm chair racerAt the back of the pack
the only problem with the YZ pipe is that this thing is aggressivly ported....
Always finding new and exciting ways to not give a hoot in hell
Catch me if you can
LRD use to make a pipe for the Z. Also try power Pros. Maybe you can convince one of the two to make one for you.
Former 2strokefreak
Arm chair racerAt the back of the pack
cool.. i'll try and find power pros contact info....
Former 2strokefreak
Arm chair racerAt the back of the pack
did anybody make and hand made pipes for tri-z's. reaplyed to a post a guy had posted on another site said he had a tri-z pipe that was section welded around the bend on the chamber....
Always finding new and exciting ways to not give a hoot in hell
Catch me if you can
Yes. LRD and the Power Pros pipes are both cone pipes. The LRD on my Z is a sectional.
Former 2strokefreak
Arm chair racerAt the back of the pack
ok this one is sectional... i'm awaiting some pics.... i know a LRD is gonna be more of a midrange pipe.. but at least i won't eb disgracign my Z with a DG
Loves Corn.
Catch me if you can
dyno port up here on NY will make a custom pipe for anything!!! www.dynoport.com
Former 2strokefreak
Arm chair racerAt the back of the pack
i actually have a set of dynoport banshee pipes.. they perfrom well...... heres my problem though... don't they need the trike for a custom fit inframe pipe???? they are in NY i'm in IN
Loves Corn.
Catch me if you can
yes they do thats a problem! Im going to call them monday and see if they are going to need the whole bike or if i can bring up a dg or stock pipe and maybe they can keep the specs on file?
Former 2strokefreak
Arm chair racerAt the back of the pack
are you having them build you a pipe????
if so.... maybe they can toss 2 together.... are you having them build you a mid-top style pipe?
Loves Corn.
Catch me if you can
im going to call them monday and find out how mutch its going to cost and if they need the bike or just an old pipe? and priceing on plated and without ill let you know, it would be easer for me to get my bike there im not too far away . ill know more monday they are real pricey though i was looking at blaster pipes the works pipe and the mid top are 299 factory finish and nickel is 324 OUTCH!!!!! and thats for a blaster,gotta figure a costum pipe might be more??????
Last edited by Bryan Raffa; 03-05-2006 at 12:00 AM.
Former 2strokefreak
Arm chair racerAt the back of the pack
well i can tell you about the plating.... they nickle plate and it's not the best job i've ever seen.... they have bad experiances with the platers around them.... the plating is not worth the $50 they charge IMO... like i said i have banshee pipes from them... they perform great though..... and the silencers are kinda cheapo also..... but if it'sa mid-top sylte inframe for a tri-z i'm all for it
Reply With Quote